Fs-3040mfp fs-3140mfp og eng - KYOCERA Document Solutions

Applying Limit of Restriction
11-26
Management
This specifies how the machine behaves when the counter has reached the limit of restriction. The table below
describes the action taken.
Item Description
Immediately *
* The next job will be prohibited in sending or in storing in the box.
Use the procedure below to apply the restriction limit.
Job stops when the counter reaches its limit.
Subsequently Printing/scanning of the job continues but the
subsequent job will be rejected.
Alert Only Job continues while displaying an alert message.
Sys. Menu/Count.:a b
*********************
1 User/Job Account
2 User Property
3 Common Settings
[ Exit ]
Login User Name L b
*******************
Login Password:
[ Login ]
User/Job Account:a b
1 User Login Set.
2 *********************
Job Account.Set.
3 Unknown ID Job
[ Exit ]
Job Account.Set.:a b
4 Each Job Account
5 Account. List
*********************
6 Default Setting
[ Exit ]
1 Press the System Menu/Counter key on the main unit
operation panel.
2 In the Sys. Menu/Count. menu, press the � or � key to
select [User/Job Account], and then press the OK key.
3 If user login administration is disabled, the user
authentication screen appears. Enter your login user
name and password and then press [Login]. For this, you
need to log in with administrator privileges. Refer to
Adding a User on page 11-6 for the default login user
name and password.
NOTE: Refer to Character Entry Method on Appendix-5 for
details on entering characters.
4 In the User/Job Account menu, press the � or � key to
select [Job Account. Set.].
5 Press the OK key. The Job Account. Set. menu appears.