RSView Supervisory Edition Installation Guide

• • • • •RSVIEW SUPERVISORY EDITION USER’S GUIDE• Severity 1 through 8 messages.• Out of Alarm and Fault State messages.• Header, body, and button areas.You can set up the blink style of:• Severity 1 through 8 messages.• Out of Alarm and Fault State messages.For details about the options in the Colors dialog box, see Help.Selecting buttonsIn the Buttons dialog box you can specify which buttons you want on the button bar in thealarm summary, and where the bar will be positioned.For descriptions of the individual buttons, see Help.To select the buttons for an alarm summary1. Select Buttons from the Format menu.2. In the Buttons dialog box, make sure that a check is displayed only in the check boxesbeside the buttons that are to be in the alarm summary. To clear a check, click thecheck box.In addition to providing Filter and Sort buttons that the operator can use at run time, youcan filter or sort alarms permanently at design time. The result of the design-time filter orsort operation is retained each time the summary is activated at run time. For moreinformation see “Choosing the data to display” on page 11-33.To change the button text1. Double-click the button you want to change.2. Type the new button text in the Text box.To position the button bar1. On the Format menu, click Button Bar Position2. Click a location. In the illustration below, the button bar is on the left.11-32