RSView Supervisory Edition Installation Guide

• • • • •RSVIEW SUPERVISORY EDITION USER’S GUIDETo assign a login or logout macro to a user account1. In the RSView User Accounts editor, click the name of the user or group of users to beassigned a login or logout macro.2. Type the name of a macro in the Login Macro and Logout Macro boxes. You can alsoclick the browse buttons, to find and select a macro in the Command Wizard.If the macro’s name contains spaces, it must be enclosed in quotes.3. Click Accept.4. Repeat steps 1 through 3 for each user to be assigned a login or logout macro, and thenclick Close.Removing users or groups from RSViewIf you remove a user or group of users from the RSView User Accounts list, you do notdelete the corresponding user or group account stored at the FactoryTalk Directory.If you delete a user or group from FactoryTalk Directory, and the account exists on theRSView list, you can remove it manually from the RSView User Accounts editor.Otherwise, it will be removed automatically, the next time you save changes in the editor.To remove accounts from the RSView users list1. In the RSView User Accounts editor, on the Setup menu, click Add Users/Groups.You can also click the Add User/Group button on the toolbar.2. In the Security Settings dialog box, select the user or group to remove, and then clickthe Remove button.Assigning security codes to RSView commands and macrosIn the RSView Secured Commands editor, create a list of the commands and macros to besecured, and then assign a security code to each.Only users or groups assigned the same security code as a particular command or macro,will be able to issue the command or macro at run time.15-26