RSView Supervisory Edition Installation Guide

• • • • •RSVIEW SUPERVISORY EDITION USER’S GUIDETo assign security to a tag1. Open the Tags editor.2. Select the tag that requires security.Click a security code.3. In the Security list, click a security code.4. Click Accept.Using the signature button to secure HMI project componentsYou can also use the signature button in a graphic display, to set up security forcommands, graphic objects, and tags. The signature button allows you to control theactions an operator can perform at run time, for example:• setting the value of a tag.• issuing a command.• downloading values to programmable controllers or devices.For details about using the Signature button, see page 17-56.Logging on and off the RSView SE clientTo start the RSView SE client, or to change users while the client is running, the userlogging on must be:• allowed to run the RSView SE client. For information about setting up the requiredpermissions, see page 15-16.• added to the RSView User Accounts list. For information about adding FactoryTalkDirectory users to RSView, see page 15-23.15-30