CJ2 CPU Unit Software User's Manual - CIP ETI

7 File Operations Changing EM File Memory SettingsThe following figures shows converting the EM Area from a specified bank to the last back to filememory.Bank 0Bank nBank 0Bank n1. Set n as the first EM file memory bank in the PLC Setup.2. Transfer the program from the CX-Programmer.Converted to file memoryBank CBank CThe following figures shows restoring EM Area banks used for file memory restored to ordinary EMArea memory.Bank 0Bank nBank 0Bank nConverted toThe contents is not predictable.ordinary memoryBank CBank CThe start bank number for file memory can be changed.1. Disable file memory conversion in the PLC Setup.2. Transfer the program from the CX-Programmer.The contents of EM Area after bank n will not be predictable.Bank 0Bank nBank mBank CConverted tofile memoryBank 0Bank nBank mBank C1. Change n to m as the first EM file memory bank in the PLC Setup.2. Transfer the program from the CX-Programmer.The contents of EM Area for banks n to m will not be predictable.The contents is not predictable.Converted tofile memory7-4 CJ2 CPU Unit Software User’s Manual