CJ2 CPU Unit Software User's Manual - CIP ETI

9 PLC SetupSelecting Standard (9600: 1,7,2,E)If Standard (9600: 1,7,2,E) is selected, the following communications settings will be used unconditionally.• Baud rate: 9,600 bps• Start bits: 1 bit• Data length: 7 bits• Stop bits: 2 bits• Parity: Even• Mode (serial communications mode): Host linkNote The mode and other settings will be disabled.Use the following procedure to set the communications to custom settings.1 Select the Custom Option for the communications settings.2 Select the serial communications mode in the Mode Field.3 Make other settings.Selecting CustomIf custom settings is selected, the following baud rates, parameters, and modes can be selected.Baud Rate (When Custom Settings Is Selected)Setting Meaning Setting MeaningRelated flags andwords115200 11,5200 bps 4800 4,800 bps A619.02 (Serial Port57600 57,600 bps 2400 2,400 bpsSettings ChangingFlag)38400 38,400 bps 1200 1,200 bps19200 19,200 bps 600 600 bps9600 (default) 9,600 bps 300 300 bps Format (When Custom Settings Is Selected)99-3 PLC Setup SettingsSelected data Data length Stop bits Parity Related flags and words7,1,E 7 1 bit Even A619.02 (Serial Port Settings7,1,OOddChanging Flag)7,1,NNone7,2,E (default) 2 bits Even7,2,OOdd7,2,NNone8,1,E 8 1 bit Even8,1,OOdd8,1,NNone8,2,E 2 bits Even8,2,OOdd8,2,NNone9-3-6 Serial Port SettingsCJ2 CPU Unit Software User’s Manual9-25