CJ2 CPU Unit Software User's Manual - CIP ETI

AppendicesA-1-2Sequence Output InstructionsInstruction Mnemonic Code Symbol/Operand Function LocationOUTPUTOUT!OUT--- Outputs the result (execution condition) of the logicalprocessing to the specified bit.OutputExecutionconditionRequiredOUTPUT NOTKEEPOUT NOT!OUT NOTKEEP!KEEP--- Reverses the result (execution condition) of the logicalprocessing, and outputs it to the specified bit.OutputRequired011 S (Set)Operates as a latching relay.Output RequiredKEEP(011)R (Reset)SetBB: BitResetS executionconditionR executionconditionA-1 Instruction Functions AppStatus of BDIFFERENTI-ATE UPDIFFERENTI-ATE DOWNDIFU!DIFUDIFD!DIFD013 DIFU(013) turns the designated bit ON for one cycle when Output RequiredDIFU(013)the execution condition goes from OFF to ON (rising edge).BExecutionB: BitconditionStatus of BOne cycle014 Output RequiredDIFD(014)DIFD(014) turns the designated bit ON for one cycle whenthe execution condition goes from ON to OFF (falling edge).BExecutionconditionB: BitA-1-2 Sequence Output InstructionsStatus of BOne cycleSETSET@SET%SET!SET--- Output RequiredSETSET turns the operand bit ON when the execution conditionis ON.BExecutionB: Bitcondition of SET!@SET!%SETStatus of BRESETRSET@RSET%RSET!RSET!@RSET--- Output RequiredRSETRSET turns the operand bit OFF when the execution conditionis ON.BExecutioncondition of RSETB: BitStatus of B!%RSETMULTIPLE BITSETSETA@SETA530 SETA(530) turns ON the specified number of consecutive bits. Output RequiredSETA(530)N2 bits are setto 1 (ON).D: Beginning wordN1: Beginning bitN2: Number of bitsCJ2 CPU Unit Software User’s ManualA-5