PDF version - ARM Information Center

Getting Started with Real-Time System ModelsUsing the command lineYou can use the -C switch to define model parameters when you invoke the model. You can alsouse --parameter as a synonym for the -C switch. See Getting started with Model Shell onpage 2-3. Use the same syntax as for a configuration file, but each parameter must be precededby the -C switch.Example 2-3 shows how to configure a MPS RTSM using Model Shell.Example 2-3 Using Model Shell to boot a model from a flash image# Boot from a flash imagemodel_shell \--parameter "coretile.core.semihosting-cmd_line="\--parameter "coretile.fname=flash.bin" \--parameter "coretile.mps_sysregs.user_switches_value=4" \--parameter "coretile.mps_sysregs.memcfg_value=0" \--parameter "mpsvisualisation.disable-visualisation=false" \--parameter "mpsvisualisation.rate_limit-enable=0" \RTSM_MPS_Cortex-M3.soARM DUI 0575A Copyright © 2011 ARM. All rights reserved. 2-5ID051811Non-Confidential