SIMOTION software - Gregbotos.com

System componentsMotorsGeneral information■ OverviewThe three-phase motors are perfectly adapted to the convertersystems SINAMICS, SIMODRIVE 611 and SIMOVERTMASTERDRIVES MC.The high power density of the servo motors makes them extremelysuitable for use in compact machines.The windings are insulated with DURIGNIT IR 2000 in accordancewith temperature class F. This provides the basis for highthermal reserves for long life and overloading.Designs/features 1FT6 1FK6 1FK7 1FN3 linear motorSpeed/velocity 1500 rpm to 6000 rpm 3000 rpm/6000 rpm 3000 rpm/4500 rpm/6000 rpmStatic torque M 0 /feed forceF N0.4 Nm to 175 Nm(0.3 lb-ft to 130 lb-ft)1.1 Nm to 36 Nm(0.8 lb-ft to 26 lb-ft)0.8 Nm to 36 Nm(0.6 lb-ft to 26 lb-ft)58 m/min to 836 m/min(190 ft/min to 2742 ft/min)200 N to 20700 NOverload capability up to max. 4xM 0 3xM 0 2.75 x F NEncoder systemIncremental encoder sin/cos 1 V pp , 2048 pulses/revolutionAbsolute encoder, multiturn, 2048 pulses/revolution (from frame size 48)and traversing range 4096 R with EnDatAbsolute encoder, multiturn, 512 pulses/revolution (frame size 28 to 36)Linear scale (enclosed oropen)• Incremental encoder• Absolute encodersand traversing range 4096 R with EnDat– Basic absolute encoder, multiturn, 32 pulses/revolution (from frame size 48) and traversing range4096 R with EnDatResolvers, two and multi-pole(number of poles corresponds to number of pole pairs of motor)Sound pressure level in accordance 55 dB(A) to 70 dB(A) –with EN 21 680Degree of protection in accordancewith EN 60 034-7 (IEC 60 034-7)IP64 to IP68IP64, IP65 additionalIP67 drive end flangeIP65CoolingInsulation of the stator winding inaccordance with EN 60 034-1 (IEC60 034-1)Natural coolingForced ventilationWater coolingNatural coolingWater coolingTemperature class F for a winding temperatureof ∆T = 100 K at an ambient temperatureof +40 °C (+104 °F)In the case of water coolinginlet temperaturemax. +25 °C (+77 °F)Holding brake Built-in (option) –Machine typePermanent-magnet excited synchronous motor, 3-phasePaint finish Anthracite Unpainted Anthracite/unpainted UnpaintedPlanetary gearing (attachment) i = 4 to 50, graded 5, 10, etc. –Temperature class H for awinding temperature of+120 °C (+240 °F)Coolant +20 °C to +35 °C(+68 °F to +95 °F)8Siemens PM 10 · 20058/73