SIMOTION software - Gregbotos.com

ssINDELTABPOWE TEMR P7 8 94 5 61 2 3. 0 +/-HILFEESCACKFCTRALTENTELRSIMOTIOIIN DE TAS L BHELPESCACKSHIF CTR AL ENTET L T RSystem componentsDistributed I/OGeneral information■ OverviewSIMATIC ET 200e.g. SIMATIC ET 200SPG/PCSINAMICS S120SIMATIC HMIs8ET 200 variantsPerfect communication on all levelsDistributed machine and plant configurations have now becomecommon practice in automation technology. This reduces thewiring outlay and significantly increases flexibility and reliability.Data transmission on the field level is handled by the standardizedfieldbus PROFIBUS DP. And the AS-Interface handlescommunication on the actuator/sensor level. This allows problem-freedata exchange throughout the whole automation world.PROFIBUS DPPROFIBUS DP is a fast, standardized bus system for the fieldlevel.The following automation components, for example, can beconnected to each other over the PROFIBUS DP fieldbus:• Programmable SIMATIC controllers• SIMOTION Motion Control system• Numerical SINUMERIK controls• SIMADYN control systems• SIMATIC industrial PC computer systems orPC-based controlWith the distributed SIMATIC ET 200 I/O system digital andanalog inputs and outputs can be connected to SIMOTION.Intelligent, distributed I/O Modules can also be used withSIMATIC ET 200.PROFIBUS DP is already completely integrated in the newSIMOTION world: Both the hardware and the software. Thisresults in simple handling right from the start. The interfaces forPROFIBUS DP are integrated in all SIMOTION devices.The isochronous mode functionality also allows PROFIBUS DP tobe used to integrate drives.PROFINETPROFINET is the innovative and open Industrial Ethernet standard(IEC 61158) for industrial automation. With PROFINET,devices can be linked up from the field level through to themanagement level.It will soon be possible to integrate the distributed SIMATICET 200 I/O systems into SIMOTION over PROFINET.AS-InterfaceWith the AS-Interface, actuators and sensors on the field levelcan be connected with a simple two-core cable. In addition tocommunication, this two-core cable is also used to supply theindividual stations with power.SIMODRIVE611 universalMASTERDRIVES MCMICROMASTER 4Master/slave configuration on PROFIBUS DPSIMOTION PSIMOTION CSIMOTION DSIMATIC S7ET 200 distributed I/OThe distributed SIMATIC ET 200 I/O provide I/O systems formany different applications:• SIMATIC ET 200M, the modular I/O system for control cabinetinstallation and high channel densities• SIMATIC ET 200S, the bit-modular I/O system for controlcabinet installation including motor starters, safety technologyand individual grouping of the load groups• SIMATIC ET 200X, the modular I/O system with IP65/67degree of protection for control cabinet-free use close to themachine including motor starters and Pneumatic Modules aswell as DESINA and ECOFAST-compliant modules• SIMATIC ET 200pro, the new modular I/O system withIP65/66/67 degree of protection for control cabinet-free useclose to the machine; with new features such as small framesize, integrated PROFIsafe safety technology, PROFINETconnection and hot swapping of modules• SIMATIC ET200eco, the compact, economical I/O system withIP67 degree of protection for control cabinet-free use close tothe machine with flexible and fast ECOFAST or M12 connectionsystem■ Further informationFor further information see Catalog IK PI and the InteractiveCatalog under "Automation Systems/SIMATIC IndustrialAutomation Systems/Distributed I/O".The I/O Modules that can be used with SIMOTION are listed inthe compatibility list which can be found at:http://www4.ad.siemens.de/WW/view/en/11886029G_PM10_en_000138/14 Siemens PM 10 · 2005