ExpressCluster X 3.1 for Linux Getting Started Guide - Nec

Before installing ExpressClusterServer connected to the Integrated WebManager to Target serverFrom To Used forServer connectedto the IntegratedWebManagerServer to bemanaged by theIntegratedWebManagerAutomaticallocation→Server 29003/TCP http communication29003 → Client 29010/UDP UDP communicationOthersFrom To Used forServerServerManagement LAN ofserver BMCManagement LAN ofserver BMCAutomaticallocationAutomaticallocationAutomaticallocationAutomaticallocation→→Networkwarning lightManagementLAN ofserver BMCSee the manualfor each product.623/UDP→ Server 162/UDP→ManagementLAN ofserver BMCServer icmp → Monitoringtarget5570/UDPicmpServer icmp → NFS server icmpServer icmp → MonitoringtargetServerServerServerServerAutomaticallocationAutomaticallocationAutomaticallocationAutomaticallocation→→→→ServerMonitoringtargetMonitoringtargetBIG-IP LTMicmpManagementport number setby the BuilderConnection portnumber set bythe BuilderLoad balancerlinkagemanagementport number setby the BuilderCommunicationport number setby the BuilderNetwork warninglight controlBMC control (Forcedstop / Chassis lampassociation)Monitoring target ofthe external linkagemonitor configuredfor BMC linkageBMC HBcommunicationIP monitorChecking if NFSserver is active byNAS resourceMonitoring target ofPing methodnetwork partitionresolution resourceJVM monitorJVM monitorJVM monitorJVM monitor1. In automatic allocation, a port number not being used at a given time is allocated.2. This is a port number used per mirror disk resource or hybrid disk resource and is set whencreating mirror disk resource or hybrid disk resource. A port number 29051 is set by default.When you add a mirror disk resource or hybrid disk resource, this value is automaticallySection II Installing ExpressCluster123