IFC 110 F V2.0 IFC 110 F-EEx V2.0 - Krohne

Part B IFC 110 F Signal converter Sect. 4.24.2 Operating and control elementsThe instrument can be operatedby means of .... Display, 1st line Display, 2nd line Display, 3rd lineDisplaying numerical dataDisplaying units and texts6 arrows to mark the current displayflow ratecurrent flow ratetotalizer + totalizer- totalizerΣ sum totalizer (+ and -)control in 1/2 control input 1 or 2 active 5 keys for operating the signal converter ← → ↵ ↑ ↓… the 15 keys and accessibleafter removal of the glass cover,… the 3 magnetic sensors and thebar magnet without opening thehousing (optional). 10 keys for direct numerical setting of function values (not function numbers) Compass field showing that a key is pressed magnet active LED green/red, magnetic sensors activegreen = built-in magnetic sensors (optional), see red = operation of one of the 3 magnetic sensors 3 magnetic sensors (optional), operated by bar magnet without opening the housing,function of the sensors as described for the three keys → ↵ ↑, see . diagnostics 2 LEDs signalling the status of measurementnormal green LED = correct measurement, everything O.K.error red LED = error, parameter or hardware error IMoComIMoCom bus, multipoint connector for connecting externalsupplementary equipment, see Section 6.4, slide window to the left05/2003 IFC 110 F 29