GENERAL CATALOG - K-Flex USA

More documents

Recommendations

Info

PYHSICAL PROPERTIES INSUL-LOCK ® WHITE TEST METHODSThermal Conductivity (K)BTU - in/hr - Ft 2 - °F (W/mK)90°F (32°C) Mean Temp75°F (24°C) Mean Temp0.27 (0.039)0.25 (0.036)ASTM C 177/C 518ASTM C 177/C 518Density 3-6 PCF ASTM D 1622/ ASTM D 3575Operating Temperature RangeUpperLower200°F (93°C)-70°F (-57°C)Water Vapor Permeability Dry Cup. Perm-In
INSUL-LOCK ® WHITE “R” VALUESPIPE O.D. ORNOMINAL INSULATION I.D.“R” VALUE 1/2”(13 MM) WALL“R” VALUE 1”(25 MM) WALL3/8” 10 mm 3.5 ——1/2” 13 mm 3.3 ——5/8” 16 mm 3.2 7.43/4” 19 mm 3.0 7.37/8” 22 mm 3.1 7.01-1/8” 29 mm 3.1 7.11-3/8” 35 mm 3.1 7.21-5/8” 41 mm 3.1 7.11-1/2” IPS —— 3.0 6.72-1/8” 54 mm 3.2 6.82” IPS —— 3.1 6.62-1/2” IPS 64 mm 3.2 6.42-5/8” 67 mm 3.2 6.53-1/8” 79 mm 3.1 6.2Note:“R” factors were calculated using a K factor of 0.2575 (0.25 plus 3% test error allowance at 75°F, 24°Cmean temp.) and nominal wall thickness is each case. Lower operating temperatures will result in improved Rvalues. Contact Technical Services for specific recommendations.Specification Compliance• ASTM C 534 Type 1 (Tubing), Grade 1• ASTM D 1056-00-2B1• USDA Compliant• RoHS Compliant• UL 94-5V Flammability Classification(Recognition No. E300774)• ASTM E 84 1” 25/50-tested according toUL 723 and NFPA 255• Complies with requirements of CAN/ULCS102-03• Acceptable for clean room applications• Meets requirements of NFPA 90A Sect. 2.3.3for Supplementary Materials for Air DistributionSystems• Meets requirements of ASTM C 411(Test Method for Hot Surface Performance of HighTemperature Thermal Insulation)• Meets requirements of UL 181sections 11.0 and 16.0 (Mold Growth/Air Erosion)• GREENGUARD certified under “Children &Schools” and “Indoor Air Quality” classificationsPAGE 35
Page 5: K-FLEX USA is a member of the IK In
Page 8 and 9: K-FLEX USA MARKETS INNOVATION IN IN
Page 10 and 11: DISTRIBUTION SHIPPING FROM YOUNGSVI
Page 12 and 13: K-FLEX IN THE WORLD DISTRIBUTION AN
Page 14 and 15: K-FLEX USA PACKAGINGINSUL-TUBE ® ,
Page 16 and 17: PHYSICAL PROPERTIES PERFORMANCE CHA
Page 18 and 19: PRODUCT CATEGORIESTUBES, SHEETS, RO
Page 20 and 21: PRODUCT RANGEPAGE 20
Page 22 and 23: INSUL-TUBE ® , INSUL-LOCK ® , INS
Page 24 and 25: Refer to K-Flex USA L.L.C.INSUL-TUB
Page 26: PIPE “R” VALUES PER SQUARE FOOT
Page 29 and 30: PIPE “R” VALUES PER SQUARE FOOT
Page 31 and 32: PYHSICAL PROPERTIES INSUL-LOCK ® T
Page 33: INSUL-LOCK ® WHITE TECHNICAL INFOR
Page 37 and 38: PYHSICAL PROPERTIES INSUL-TUBE ® C
Page 39 and 40: Refer to K-Flex USA L.L.C.INSUL-SHE
Page 41 and 42: THICKNESS RECOMMENDATIONS* - TO CON
Page 43 and 44: PYHSICAL PROPERTIES INSUL-SHEET ®
Page 45 and 46: K-FLEX ACCESSORIEScomplete range of
Page 47 and 48: K-FLEX ® ELASTOMERIC FOAM TAPE TEC
Page 49 and 50: K-FLEX ® 374 PROTECTIVE COATING TE
Page 51 and 52: PHYSICAL PROPERTIESColorBaseSolvent
Page 53 and 54: PHYSICAL PROPERTIESColor Amber (320
Page 55: PHYSICAL PROPERTIESColorSolventsVis
Page 58 and 59: K-FIT ® PREFABRICATED FITTINGSBENE
Page 60 and 61: K-FIT ® TECHNICAL INFORMATIONPHYSI
Page 62 and 63: PAGE 62
Page 64 and 65: K-FLEX CLAD ® AL 1-STEP APPLICATIO
Page 66 and 67: The all inclusive insulation system
Page 69 and 70: PHYSICAL PROPERTIES OF PVC/MYLAR ®
Page 71 and 72: K-FLEX CLAD ® WT NS TECHNICAL INFO
Page 73 and 74: K-FLEX CLAD ® IN PERFECT FOR LNG A
Page 75 and 76: PHYSICAL PROPERTIES OF K-FLEX CLAD
Page 77 and 78: K-FLEX CLAD ® TAPE WT TECHNICAL IN
Page 79 and 80: K-FLEX DUCT ® LINER GRAYdesigned f
Page 81 and 82: K-FLEX DUCT ® LINER GRAY TECHNICAL
Page 83 and 84: THICKNESS RECOMMENDATIONS* - TO CON
Page 85 and 86:
K-FLEX ECO a halogen-free insulatio
Page 87 and 88:
K-FLEX ECO TECHNICAL INFORMATIONUL
Page 89 and 90:
K-FLEX ® ELASTOMERIC FOAM TAPE - E
Page 91 and 92:
K-FONIKmaterials for noise reductio
Page 93 and 94:
K-FONIK APPLICATION GROUPSNOISE BAR
Page 95 and 96:
K-FONIK AB ACOUSTIC PERFORMANCENois
Page 97 and 98:
K-FONIK GK/GV ACOUSTIC PERFORMANCEG
Page 99 and 100:
SPECIFICATION BULLETINSTS1 Standard
show all

GENERAL CATALOG - K-Flex USA

Create successful ePaper yourself

Delete template?

Save as template?