GENERAL CATALOG - K-Flex USA

More documents

Recommendations

Info

K-FONIK GK/GV TECHNICAL INFORMATIONMade in <strong>USA</strong>DESCRIPTIONK-FONIK GK and GV high mass noise barriersare flexible, non-reinforced, resilientmass loaded elastomeric materials thatblock the transmission of airborne noisefrom one area to another. K-FONIK highmass products are ideal for direct applicationto the noise source and/or to the housingcovering the noise source. The productcomes in black (GK) and gray (GV), andis stocked in rolls (10’ or 25’ length x 48”width) of densities: 1.0 and 1.5 lb/sq ft. Theproduct has a temperature range of -297°Fto +240°F.The reduction of airborne noise and massproperties exhibited by K-FONIK highmass products are attained without theuse of hazardous lead or heavy metals.K-FONIK high mass products are madewith fire-resistant mineral fillers.K-FONIK GV has been tested to the followingflammability test methods: IMO A653(CE Marine), ASTM E84, E162, and E662.APPLICATIONSK-FONIK high mass products offer excellentacoustic performance (STC = 26 dB at1.0 lb/sq ft). Sound barrier materials reducestructure-borne noise generated by a vibratingsurface and airborne noise when placedbetween a sound source and its receiver.The vibration of metal panels, housingsand enclosures is a common source of highintensity noise.The reduction of resonant vibrational energyand noise can efficiently and economicallybe achieved by use of K-FONIK high massproducts, which convert vibrational energyto heat energy, resulting in the followingbenefits: reduction of vibration transfer toadjoined surfaces, increased working lifeof the metal, and the ability to use thinnermetal without the need for ribs, shaping, orother complications.Equipment and Engine Rooms:A) Free-hanging soundproof acousticalcurtain panelB) Interior surfaces – To reduce noise fromtransferring through walls, ceilings andfloors.Machine Covers:Wrapped to reduce noise and vibration.Piping:To reduce transmission noise on processand drain piping in industrial applications.General Construction:Floors and pipingMass Transit / Shipbuilding:Floors and Engine RoomsINSTALLATIONK-FONIK GK and GV are supplied in flexiblerolls in several densities. It is easily cutand fabricated.K-FONIK GK and GV can be adhered tomost non-porous substrates using K-<strong>Flex</strong> ®620 Contact Adhesive.FLAME AND SMOKE RATINGK-FONIK GVS in 1.5 lb/sq ft mass hasa flame spread rating of 25 or less and asmoke development rating of 50 or lessas tested by ASTM E84, “Surface BurningCharacteristics of Building Materials”.SPECIFICATION COMPLIANCEGV:• FMVSS 302 - Pass• ASTM E84 - 25/50 (Flame / Smoke rating)• ASTM E162 - 25 max• ASTM E662 - 100 maxGK:• ASTM E84 - 25/50 (Flame / Smoke rating)•FMVSS 302 - PassPAGE 96
K-FONIK GK/GV ACOUSTIC PERFORMANCEGKGVFREQ.Hz100125160200250315400500630800100012501600200025003150400050001.0TL dB1817171517182022242527283032343536381.5TL dB1617171817182123242627282929303335361.5TL dB141516181819212324262830323435373941Sound Transmission Loss dB45403530252015105010012516020025031540050063080010001250160020002500315040005000Frequency HzGK 1.0GK 1.5GV 1.5PHYSICAL PROPERTIES K-FONIK GK K-FONIK GVMaterial Type High-Mass elastomeric material High-Mass elastomeric materialColor Black GraySpecific Gravity (min) 2.0 2.0Tensile (psi) (min) 300 300Elongation (%) (min) 25 10Tear Die C (lbs) (min) 50 50Thermal Conductivity (k-value Btu (in/hr-ft 2 -°F)) 0.16 0.16Temperature Resistance -297°F to 240°F -297°F to 240°FSurface Finish Smooth SmoothThicknesses (in) 0.12, 0.16 0.12, 0.16Mass (lb/sqft) 1.0, 1.5 1.0, 1.5STC (1.5 lb/ sq ft)21 (0.5 lb/sq ft)27 (1.5 lb/ sq ft)25 (0.75 lb/sq ft)26 (1.0 lb/ sq ft); 26 (1.5 lb/ sq ft)Fire Classification FMVSS 302 ASTM E-84: 25/50 max, ASTM E-162: 25max, ASTM E-662: 100 max, FMVSS 302PAGE 97
Page 5:
K-FLEX USA is a member of the IK In
Page 8 and 9:
K-FLEX USA MARKETS INNOVATION IN IN
Page 10 and 11:
DISTRIBUTION SHIPPING FROM YOUNGSVI
Page 12 and 13:
K-FLEX IN THE WORLD DISTRIBUTION AN
Page 14 and 15:
K-FLEX USA PACKAGINGINSUL-TUBE ® ,
Page 16 and 17:
PHYSICAL PROPERTIES PERFORMANCE CHA
Page 18 and 19:
PRODUCT CATEGORIESTUBES, SHEETS, RO
Page 20 and 21:
PRODUCT RANGEPAGE 20
Page 22 and 23:
INSUL-TUBE ® , INSUL-LOCK ® , INS
Page 24 and 25:
Refer to K-Flex USA L.L.C.INSUL-TUB
Page 26:
PIPE “R” VALUES PER SQUARE FOOT
Page 29 and 30:
PIPE “R” VALUES PER SQUARE FOOT
Page 31 and 32:
PYHSICAL PROPERTIES INSUL-LOCK ® T
Page 33 and 34:
INSUL-LOCK ® WHITE TECHNICAL INFOR
Page 35 and 36:
INSUL-LOCK ® WHITE “R” VALUESP
Page 37 and 38:
PYHSICAL PROPERTIES INSUL-TUBE ® C
Page 39 and 40:
Refer to K-Flex USA L.L.C.INSUL-SHE
Page 41 and 42:
THICKNESS RECOMMENDATIONS* - TO CON
Page 43 and 44:
PYHSICAL PROPERTIES INSUL-SHEET ®
Page 45 and 46: K-FLEX ACCESSORIEScomplete range of
Page 47 and 48: K-FLEX ® ELASTOMERIC FOAM TAPE TEC
Page 49 and 50: K-FLEX ® 374 PROTECTIVE COATING TE
Page 51 and 52: PHYSICAL PROPERTIESColorBaseSolvent
Page 53 and 54: PHYSICAL PROPERTIESColor Amber (320
Page 55: PHYSICAL PROPERTIESColorSolventsVis
Page 58 and 59: K-FIT ® PREFABRICATED FITTINGSBENE
Page 60 and 61: K-FIT ® TECHNICAL INFORMATIONPHYSI
Page 62 and 63: PAGE 62
Page 64 and 65: K-FLEX CLAD ® AL 1-STEP APPLICATIO
Page 66 and 67: The all inclusive insulation system
Page 69 and 70: PHYSICAL PROPERTIES OF PVC/MYLAR ®
Page 71 and 72: K-FLEX CLAD ® WT NS TECHNICAL INFO
Page 73 and 74: K-FLEX CLAD ® IN PERFECT FOR LNG A
Page 75 and 76: PHYSICAL PROPERTIES OF K-FLEX CLAD
Page 77 and 78: K-FLEX CLAD ® TAPE WT TECHNICAL IN
Page 79 and 80: K-FLEX DUCT ® LINER GRAYdesigned f
Page 81 and 82: K-FLEX DUCT ® LINER GRAY TECHNICAL
Page 83 and 84: THICKNESS RECOMMENDATIONS* - TO CON
Page 85 and 86: K-FLEX ECO a halogen-free insulatio
Page 87 and 88: K-FLEX ECO TECHNICAL INFORMATIONUL
Page 89 and 90: K-FLEX ® ELASTOMERIC FOAM TAPE - E
Page 91 and 92: K-FONIKmaterials for noise reductio
Page 93 and 94: K-FONIK APPLICATION GROUPSNOISE BAR
Page 95: K-FONIK AB ACOUSTIC PERFORMANCENois
Page 99 and 100: SPECIFICATION BULLETINSTS1 Standard
show all

GENERAL CATALOG - K-Flex USA

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?