GENERAL CATALOG - K-Flex USA

More documents

Recommendations

Info

K-FIT ® TECHNICAL INFORMATIONPHYSICAL PROPERTIES K-FIT ®*ATTRIBUTE K-FIT ® BLACK TEST METHODS ATTRIBUTE K-FIT ® BLACK TESTMETHODSTemperature RangeThermal Conductivity BTU-in/hr-ft 2 -˚F75˚F Mean temp-297˚F to +220˚F(-182˚C to+104˚C)ASTM C 411 Odor Negligible0.245 ASTM C 177, ASTM C 518 Ozone resistance Good ASTM D 1171Water vapor permeability 0.03 perm-in ASTM E 96 % closed cells >90Water absorption %
K-FIT ® “R” VALUES PER SQUARE FOOTPIPE O.D OR NOMINAL R VALUE 3/8”INSULATION I.D. (10 mm) WALLR VALUE 1/2”(13 mm) WALLR VALUE 3/4”(19 mm) WALLR VALUE 1”(25 mm) WALLR VALUE 1-1/4”(32 mm) WALLR VALUE 1-1/2”(38 mm) WALL3/8” 10 mm 2.7 3.6 5.6 —— —— ——1/2” 13 mm 2.5 3.4 5.4 —— —— ——5/8” 16 mm 2.5 3.3 5.4 7.5 10.5 12.83/4” 19 mm 2.3 3.1 5.4 7.5 9.9 12.17/8” 22 mm 2.3 3.2 5.4 7.2 9.5 11.61-1/8" 29 mm 2.3 3.1 5.5 7.1 8.9 10.81-3/8” 35 mm 2.2 3.2 5.3 7.3 8.4 10.21-5/8” 41 mm 2.4 3.1 5.1 7.1 8.1 9.81-1/2” IPS 48 mm 2.3 3.0 4.9 6.7 7.7 9.32-1/8” 54 mm 2.3 3.0 4.9 6.8 7.6 9.22” IPS 60 mm 2.3 2.9 4.8 6.5 7.4 9.02-1/2” IPS 64 mm 2.3 3.0 4.6 6.3 7.2 8.62-5/8” 67 mm 2.3 3.1 4.7 6.4 7.3 8.83-1/8” 79 mm 2.3 3.0 4.6 6.2 7.1 8.53” IPS 89 mm 2.3 3.2 4.6 6.1 7.0 8.33-5/8” 92 mm 2.3 3.2 4.6 6.1 6.9 8.34-1/8” 105 mm 2.3 3.1 4.6 6.0 6.8 8.14” IPS 114 mm 2.3 3.2 4.7 6.0 6.8 8.15” IPS 140 mm —— 3.2 4.5 5.9 6.6 7.86” IPS 168 mm —— 3.1 4.5 5.8 6.5 7.6Note: “R” factors were calculated using a K factor of 0.245 (at 75°F, 24°C mean temp.) and nominal wall thickness is each case. Lower operating temperatures willresult in improved R values. Contact Technical Services for specific recommendations.SPECIFICATION COMPLIANCE*• ASTM C 534 Type 1 (Tubing), Type 1 / Grade 3 (ECO)• ASTM D 1056-00-2B1• New York City MEA 186-86-M Vol. IV• USDA Compliant• RoHS Compliant• UL 94-5V Flammability Classification(Recognition No. E300774)• ASTM E 84 1-1/2” 25/50-tested according toUL 723 and NFPA 255• Complies with requirements of CAN/ULC S102-M88• FMRC Approval Guide Chapter 14 Pipe Insulation• NFPA No. 101 Class A Rating• Meets requirements of NFPA 90A Sect. 2.3.3 forSupplementary Materials for Air Distribution Systems•Meets requirements of ASTM C 411 (Test Methodfor Hot Surface Performance of High TemperatureThermal Insulation)• Meets requirements of UL 181 sections 11.0 and16.0 (Mold Growth/Air Erosion)• GREENGUARD ® certified under the “Children &Schools” and “Indoor Air Quality” classifications• Meets energy code requirements of ASHRAE 90.1and 189.1* Not applicable to K-FLEX ECOPAGE 61
Page 5:
K-FLEX USA is a member of the IK In
Page 8 and 9:
K-FLEX USA MARKETS INNOVATION IN IN
Page 10 and 11: DISTRIBUTION SHIPPING FROM YOUNGSVI
Page 12 and 13: K-FLEX IN THE WORLD DISTRIBUTION AN
Page 14 and 15: K-FLEX USA PACKAGINGINSUL-TUBE ® ,
Page 16 and 17: PHYSICAL PROPERTIES PERFORMANCE CHA
Page 18 and 19: PRODUCT CATEGORIESTUBES, SHEETS, RO
Page 20 and 21: PRODUCT RANGEPAGE 20
Page 22 and 23: INSUL-TUBE ® , INSUL-LOCK ® , INS
Page 24 and 25: Refer to K-Flex USA L.L.C.INSUL-TUB
Page 26: PIPE “R” VALUES PER SQUARE FOOT
Page 29 and 30: PIPE “R” VALUES PER SQUARE FOOT
Page 31 and 32: PYHSICAL PROPERTIES INSUL-LOCK ® T
Page 33 and 34: INSUL-LOCK ® WHITE TECHNICAL INFOR
Page 35 and 36: INSUL-LOCK ® WHITE “R” VALUESP
Page 37 and 38: PYHSICAL PROPERTIES INSUL-TUBE ® C
Page 39 and 40: Refer to K-Flex USA L.L.C.INSUL-SHE
Page 41 and 42: THICKNESS RECOMMENDATIONS* - TO CON
Page 43 and 44: PYHSICAL PROPERTIES INSUL-SHEET ®
Page 45 and 46: K-FLEX ACCESSORIEScomplete range of
Page 47 and 48: K-FLEX ® ELASTOMERIC FOAM TAPE TEC
Page 49 and 50: K-FLEX ® 374 PROTECTIVE COATING TE
Page 51 and 52: PHYSICAL PROPERTIESColorBaseSolvent
Page 53 and 54: PHYSICAL PROPERTIESColor Amber (320
Page 55: PHYSICAL PROPERTIESColorSolventsVis
Page 58 and 59: K-FIT ® PREFABRICATED FITTINGSBENE
Page 62 and 63: PAGE 62
Page 64 and 65: K-FLEX CLAD ® AL 1-STEP APPLICATIO
Page 66 and 67: The all inclusive insulation system
Page 69 and 70: PHYSICAL PROPERTIES OF PVC/MYLAR ®
Page 71 and 72: K-FLEX CLAD ® WT NS TECHNICAL INFO
Page 73 and 74: K-FLEX CLAD ® IN PERFECT FOR LNG A
Page 75 and 76: PHYSICAL PROPERTIES OF K-FLEX CLAD
Page 77 and 78: K-FLEX CLAD ® TAPE WT TECHNICAL IN
Page 79 and 80: K-FLEX DUCT ® LINER GRAYdesigned f
Page 81 and 82: K-FLEX DUCT ® LINER GRAY TECHNICAL
Page 83 and 84: THICKNESS RECOMMENDATIONS* - TO CON
Page 85 and 86: K-FLEX ECO a halogen-free insulatio
Page 87 and 88: K-FLEX ECO TECHNICAL INFORMATIONUL
Page 89 and 90: K-FLEX ® ELASTOMERIC FOAM TAPE - E
Page 91 and 92: K-FONIKmaterials for noise reductio
Page 93 and 94: K-FONIK APPLICATION GROUPSNOISE BAR
Page 95 and 96: K-FONIK AB ACOUSTIC PERFORMANCENois
Page 97 and 98: K-FONIK GK/GV ACOUSTIC PERFORMANCEG
Page 99 and 100: SPECIFICATION BULLETINSTS1 Standard
show all

GENERAL CATALOG - K-Flex USA

Create successful ePaper yourself

Delete template?

Save as template?