GENERAL CATALOG - K-Flex USA

More documents

Recommendations

Info

K-FLEX DUCT ® LINER GRAY DESIGNED FOR AIR HANDLING SYSTEMSK-FLEX DUCT ® LINER GRAY is a fiberfree,moisture- and mold-resistant ductliner that offers excellent performanceproperties, including a NoiseReduction Coefficient (NRC) of 0.50for 1” thickness and GREENGUARD ®Certifications for low VOC’s andmicrobial resistance.K-FLEX DUCT ® LINER GRAY meetsthe 25/50 flame spread and smokedevelopment rating up to 2” thickaccording to ASTM E-84 standards.BENEFITS:• Available in R-8• Increases the efficiency ofHVAC systems• Safe to install• Moisture and Mold resistance• Flexible material for an easyinstallation• Reduce NoiseAPPLICATIONS:• Schools• Hospitals• Public Buildings• Clean Rooms/ProcessingPlants• HotelsPAGE 80
K-FLEX DUCT ® LINER GRAY TECHNICAL INFORMATIONUL 94(Recognition No. E300774)Refer to K-Flex USA L.L.C.Made in USAContains a ProtectiveAntimicrobial AgentDESCRIPTIONK-FLEX Duct ® Liner Gray is a CFC- andHCFC-free, closed cell, flexible elastomericthermal and acoustical insulation. It is grayin color and supplied in rolls up to 60” widefrom 1/2” to 2” thickness*. It is supplied eitheras S2S (Skin 2 Sides) or with a factoryappliedscrim-reinforced acrylic adhesive onthe opposite side.**K-FLEX Duct ® Liner Gray is non-porous,fiber-free and resists mold growth. AnEPA-registered antimicrobial agent isincorporated into the product providingadditional protection against mold, fungaland bacterial growth. K-FLEX Duct ® LinerGray is GREENGUARD ® certified as a lowVOC material, meeting the requirements forthe “Children & Schools” and “Indoor AirQuality” classifications.Features of PSA**: tear- and moistureresistantpolyolefin easy release liner;continuous reinforcing scrim that preventsstretching of insulation and improves peelstrength.APPLICATIONSK-FLEX Duct ® Liner Gray is used to retardheat gain / loss and prevent condensationor frost formation on equipment or ducts.K-FLEX Duct ® Liner Gray is recommended forapplications ranging from -40°F to 200°F(-40°C to 93°C).K-FLEX Duct ® Liner Gray can be used asduct and air handling equipment liner, andis R-8 at 2” thickness. R-values designatethe thermal resistance value of a material.K-FLEX Duct ® Liner Gray with PSA**reduces installation time and minimizes theamount of solvent-based contact adhesivesrequired, making it ideal for new and retrofitapplications. The scrim reinforcementreduces the tendency to stretch the sheetinsulation during installation and improvesthe peel strength of the material.Thickness recommendations for K-FLEXDuct ® Liner Gray have been calculated tocontrol condensation on cold surfaces. (Referto the table on the next page for specificrecommendations.)INSTALLATIONK-FLEX Duct ® Liner Gray should be appliedto clean, dry ductwork and equipment.Adhesive should be applied to all compressionjoints and used on all butt edges. Applymechanical fasteners in accordance withSMACNA guidelines.When air stream velocities exceed 4,000 FPM(20.3m/second), metal nosing is recommendedto be applied to every leading edge.Nosing may be formed, channeled or zeeattachedon duct by screws, rivets or welds.K-FLEX Duct ® Liner Gray is acceptable foruse in duct or plenum applications, meetingthe requirements of NFPA 90A and 90B.RESISTANCE TO MOISTUREVAPOR FLOWThe closed cell structure and unique formulationof K-FLEX Duct ® Liner Gray effectivelyretards the flow of moisture vapor, and isconsidered a low transmittance vapor retarder.For most applications, K-FLEX Duct ®Liner Gray needs no additional protection.Ideal Applications include air handlingsystems in schools, hospitals, hotels, publicbuildings and clean/processing rooms.* PSA available up to 1-1/2” thickness.**All thicknesses are nominal.PAGE 81
Page 5:
K-FLEX USA is a member of the IK In
Page 8 and 9:
K-FLEX USA MARKETS INNOVATION IN IN
Page 10 and 11:
DISTRIBUTION SHIPPING FROM YOUNGSVI
Page 12 and 13:
K-FLEX IN THE WORLD DISTRIBUTION AN
Page 14 and 15:
K-FLEX USA PACKAGINGINSUL-TUBE ® ,
Page 16 and 17:
PHYSICAL PROPERTIES PERFORMANCE CHA
Page 18 and 19:
PRODUCT CATEGORIESTUBES, SHEETS, RO
Page 20 and 21:
PRODUCT RANGEPAGE 20
Page 22 and 23:
INSUL-TUBE ® , INSUL-LOCK ® , INS
Page 24 and 25:
Refer to K-Flex USA L.L.C.INSUL-TUB
Page 26:
PIPE “R” VALUES PER SQUARE FOOT
Page 29 and 30: PIPE “R” VALUES PER SQUARE FOOT
Page 31 and 32: PYHSICAL PROPERTIES INSUL-LOCK ® T
Page 33 and 34: INSUL-LOCK ® WHITE TECHNICAL INFOR
Page 35 and 36: INSUL-LOCK ® WHITE “R” VALUESP
Page 37 and 38: PYHSICAL PROPERTIES INSUL-TUBE ® C
Page 39 and 40: Refer to K-Flex USA L.L.C.INSUL-SHE
Page 41 and 42: THICKNESS RECOMMENDATIONS* - TO CON
Page 43 and 44: PYHSICAL PROPERTIES INSUL-SHEET ®
Page 45 and 46: K-FLEX ACCESSORIEScomplete range of
Page 47 and 48: K-FLEX ® ELASTOMERIC FOAM TAPE TEC
Page 49 and 50: K-FLEX ® 374 PROTECTIVE COATING TE
Page 51 and 52: PHYSICAL PROPERTIESColorBaseSolvent
Page 53 and 54: PHYSICAL PROPERTIESColor Amber (320
Page 55: PHYSICAL PROPERTIESColorSolventsVis
Page 58 and 59: K-FIT ® PREFABRICATED FITTINGSBENE
Page 60 and 61: K-FIT ® TECHNICAL INFORMATIONPHYSI
Page 62 and 63: PAGE 62
Page 64 and 65: K-FLEX CLAD ® AL 1-STEP APPLICATIO
Page 66 and 67: The all inclusive insulation system
Page 69 and 70: PHYSICAL PROPERTIES OF PVC/MYLAR ®
Page 71 and 72: K-FLEX CLAD ® WT NS TECHNICAL INFO
Page 73 and 74: K-FLEX CLAD ® IN PERFECT FOR LNG A
Page 75 and 76: PHYSICAL PROPERTIES OF K-FLEX CLAD
Page 77 and 78: K-FLEX CLAD ® TAPE WT TECHNICAL IN
Page 79: K-FLEX DUCT ® LINER GRAYdesigned f
Page 83 and 84: THICKNESS RECOMMENDATIONS* - TO CON
Page 85 and 86: K-FLEX ECO a halogen-free insulatio
Page 87 and 88: K-FLEX ECO TECHNICAL INFORMATIONUL
Page 89 and 90: K-FLEX ® ELASTOMERIC FOAM TAPE - E
Page 91 and 92: K-FONIKmaterials for noise reductio
Page 93 and 94: K-FONIK APPLICATION GROUPSNOISE BAR
Page 95 and 96: K-FONIK AB ACOUSTIC PERFORMANCENois
Page 97 and 98: K-FONIK GK/GV ACOUSTIC PERFORMANCEG
Page 99 and 100: SPECIFICATION BULLETINSTS1 Standard
show all

GENERAL CATALOG - K-Flex USA

Create successful ePaper yourself

Delete template?

Save as template?