K-FLEX CLAD ® WT NS PERFECT FOR SLIDE-ON APPLICATIONSNo longitudinal seamfor improved moisturevapor barrier<strong>Flex</strong>ible, closed cellelastomeric insulationAbuse-resistantPVCsheet laminatedto Mylar ®filmFor specific installation instructionssee K-FLEX Clad ® installation guideJacketseam issealed via adhesiveand mechanicalclosure systemsK-FLEX CLAD ® WT NS has a whitefinish which makes it perfect for indoorslide-on applications where pipingsystems are exposed and cleanabilityand appearance are important. Theclad jacketing meets the 25/50 flamespread / smoke development standardwhen tested to ASTM E 84 standardsand will not dent or wrinkle whenexposed to mechanical abuse. K-FLEXCLAD ® WT tubing is certified by NSFInternational for NSF/ANSI Standard169, “Special Purpose Food Equipmentand Devices”.BENEFITS:• Easy to install• Improved Reliability• Minimal Maintenance• Insulation can be installedbefore building is enclosedAPPLICATIONS:• Indoor applications• Food Processing Plants• Other clean room applicationsSPECIFICATION COMPLIANCE• ASTM C 534 Type 1 (Tubing), Grade 1• USDA Compliant• RoHS Compliant• ASTM E84 1-1/2” 25/50-tested according to UL723 and NFPA 255• Complies with requirements of CAN/ULCS102-M88• NSF/ANSI Standard 169PAGE 70
K-FLEX CLAD ® WT NS TECHNICAL INFORMATIONMade in <strong>USA</strong>Contains a ProtectiveAntimicrobial AgentDESCRIPTIONK-FLEX Clad ® WT NS, available in tubularform, is a composite product comprised ofclosed cell elastomeric insulation adhered toa white PVC/Mylar ® film.K-FLEX Clad ® WT NS is non-porous, fiberfree,CFC- and HCFC-free. K-FLEX Clad ® WTNS is GREENGUARD ® certified as a low VOCmaterial, meeting the criteria for the “Childrenand Schools” and “Indoor Air Quality”classifications. It complies with Health,Safety and Environmental requirements.K-FLEX Clad ® WT NS tubing is also certifiedby NSF International for NSF/ANSI Standard169, “Special Purpose Food Equipment andDevices”.K-FLEX Clad ® WT NS is available in allstandard ID’s in 1/2”, 1”, 1-1/4” and1-1/2” wall thicknesses in 3-foot lengths.The PVC/Mylar ® film composite claddingprovides a secondary moisture vapor barrierto the inherently moisture-resistantclosed cell foam core and meets 25/50requirements for flame spread and smokedevelopment when tested according toASTM E84 standards.APPLICATIONSK-FLEX Clad ® WT NS is an ideal choice foroutdoor (roof top) and indoor applications,including supermarkets, food processingplants, pharmaceutical facilities, filmprocessing centers, electronics facilitiesand other clean room applications subjectto code compliance. The product is non-slitfor slide-on applications. By eliminating afield-applied longitudinal seam, it providesa superior moisture vapor barrior and morereliable performance. K-FIT ® factory-fabricatedfittings and K-FLEX Clad ® WT Coverscomplete the installation.The cladding provides weather and abuseresistance, as well as protection from UVrays. The smooth white surface is easy toclean, dust-free, resistant to acids, alkali,salts, oil, fats and aliphatic hydrocarbons,and is highly impermeable to gases andmoisture. Cladding does not dent liketraditional metal jackets, has excellentappearance and is easy to maintain.This composite product has a low thermalconductivity, a high water vapor diffusionresistance factor and greatly reducesthe problem of under insulation corrosion.Standard K-FLEX Clad ® WT NS can be usedin a temperature range of -297°F to +220°F.INSTALLATIONThe non-slit, slide-on feature saves timeclosing seams and increases the reliabilityof the vapor barrier. K-FLEX Clad ® WT NS islight and easy to handle. The K-FLEX Clad ®WT NS system provides installed cost andtime savings over traditional metal jacket,PVC or mastic systems, along with improvedperformance and less maintenancerequirements. The preformed elbows andmatching tape allows for a professionaland durable installation.PAGE 71