GENERAL CATALOG - K-Flex USA

More documents

Recommendations

Info

K-FLEX ECO A HALOGEN-FREE ALTERNATIVEHalogenFreeBENEFITS:• Halogen-Free Formula, does notcontribute to stress crack corrosionon stainless steel• High temperature range -297°F to300°F• Moisture Vapor ResistanceAPPLICATIONS:• Shipbuilding/Railways• Refrigeration• Industrial Processes up to 300°FK-FLEX ECO IS FLEXIBLE, CLOSED CELL, HALOGEN-FREE INSULATION with a distinctive green color foreasy identification. Environmentally-friendly, K-FLEXECO products are offered in sheet/roll and tube form.Sheets/rolls are available with PSA (Pressure SensitiveAdhesive) for easy and efficient installation. The PSAoffering ensures a tight bond without the use of contactadhesives.K-FLEX ECO is ideal for marine applications rangingfrom naval surface vessels and submarines to offshoreoil platforms as it complies with several marinerequirements.PAGE 82
K-FLEX ECO TECHNICAL INFORMATIONUL 94(Recognition No. E300774)Made in USARefer to K-Flex USA L.L.C.DESCRIPTIONK-FLEX ECO is a halogen-free, closed cellelastomeric insulation. It is green in colorand is available in tube and sheet form.Tube sizes range from 3/8” inside diameterto 8” IPS, in 1/2”, 3/4” and 1” wall thickness.Sheets and rolls are available in 1/2”,3/4” and 1” thickness (1-1/2” skin-2-side).K-FLEX ECO does not contain carbonblack in accordance with United StatesNavy Environmental Department standards.Additionally, K-FLEX ECO does notcontain fibers, PVC, or CFCs.APPLICATIONSK-FLEX ECO was developed for applicationswhere corrosive smoke and environmentalissues (toxicity) are critical. It issuitable for piping, vessels, and duct workon United States Naval Ships, the generalmaritime industry, and other industrialapplications. K-FLEX ECO is certified toElectric Boat Corporation Specification EB4013 and meets the requirements specifiedby the International Maritime Organizationper the SOLAS Agreement.K-FLEX ECO is used to insulate hot pipingup to 300°F (1” thickness minimum). Itcan be used as an alternative to low-temperaturefiberglass, calcium silicate andpolyimide insulation. K-FLEX ECO canbe used on 50 lb. steam lines with designtemperatures up to 300°F (1” thicknessminimum). Used under these conditions acomparable thin layer of discolored hardenedmaterial in the inner wall will form.This constitutes a normal reaction and doesnot in any way adversely affect the insulationproperties of the foam.K-FLEX ECO is also used on cruise shipsand other commercial vessels. It is suitablefor use in industrial and commercial areasas well, including clean rooms and food /beverage manufacturing facilities where afiber-free environment is specified.K-FLEX ECO is well-suited for stainlesssteel applications since it does not containhalogens that are known to contribute tocorrosion problems.INSTALLATIONK-FLEX ECO is applied following theguidelines used for all K-FLEX USA elastomericinsulation products. Tubing slideseasily over piping, or for existing lines, tubingis slit lengthwise and sealed into place.All seams and joints should be sealed withan approved contact adhesive. K-FLEX ®720 LVOC Contact Adhesive is a halogenfreecontact adhesive suitable for use withK-FLEX ECO.When K-FLEX ECO is applied to vesselsand duct work, use 100% coverage of anapproved contact adhesive. Both surfacesto be joined should be coated and thenjoined after the adhesive is dry to the touch.Compression joints with adhesive appliedshould be used on all butt edges. For detailedinstallation procedures, reference theK-FLEX USA Insulation Installation Guide.RESISTANCE TO MOISTUREVAPOR FLOWThe closed cell structure and uniqueformulation of K-FLEX ECO effectivelyretards the flow of moisture vapor, and isconsidered a diffusion resistant insulation.For most applications, K-FLEX ECOrequires no additional protection. Additionalvapor barrier protection may be necessaryfor K-FLEX ECO when installed on lowtemperature surfaces in combination withcontinuous high humidity conditions.PAGE 87
Page 5:
K-FLEX USA is a member of the IK In
Page 8 and 9:
K-FLEX USA MARKETS INNOVATION IN IN
Page 10 and 11:
DISTRIBUTION SHIPPING FROM YOUNGSVI
Page 12 and 13:
K-FLEX IN THE WORLD DISTRIBUTION AN
Page 14 and 15:
K-FLEX USA PACKAGINGINSUL-TUBE ® ,
Page 16 and 17:
PHYSICAL PROPERTIES PERFORMANCE CHA
Page 18 and 19:
PRODUCT CATEGORIESTUBES, SHEETS, RO
Page 20 and 21:
PRODUCT RANGEPAGE 20
Page 22 and 23:
INSUL-TUBE ® , INSUL-LOCK ® , INS
Page 24 and 25:
Refer to K-Flex USA L.L.C.INSUL-TUB
Page 26:
PIPE “R” VALUES PER SQUARE FOOT
Page 29 and 30:
PIPE “R” VALUES PER SQUARE FOOT
Page 31 and 32:
PYHSICAL PROPERTIES INSUL-LOCK ® T
Page 33 and 34:
INSUL-LOCK ® WHITE TECHNICAL INFOR
Page 35 and 36: INSUL-LOCK ® WHITE “R” VALUESP
Page 37 and 38: PYHSICAL PROPERTIES INSUL-TUBE ® C
Page 39 and 40: Refer to K-Flex USA L.L.C.INSUL-SHE
Page 41 and 42: THICKNESS RECOMMENDATIONS* - TO CON
Page 43 and 44: PYHSICAL PROPERTIES INSUL-SHEET ®
Page 45 and 46: K-FLEX ACCESSORIEScomplete range of
Page 47 and 48: K-FLEX ® ELASTOMERIC FOAM TAPE TEC
Page 49 and 50: K-FLEX ® 374 PROTECTIVE COATING TE
Page 51 and 52: PHYSICAL PROPERTIESColorBaseSolvent
Page 53 and 54: PHYSICAL PROPERTIESColor Amber (320
Page 55: PHYSICAL PROPERTIESColorSolventsVis
Page 58 and 59: K-FIT ® PREFABRICATED FITTINGSBENE
Page 60 and 61: K-FIT ® TECHNICAL INFORMATIONPHYSI
Page 62 and 63: PAGE 62
Page 64 and 65: K-FLEX CLAD ® AL 1-STEP APPLICATIO
Page 66 and 67: The all inclusive insulation system
Page 69 and 70: PHYSICAL PROPERTIES OF PVC/MYLAR ®
Page 71 and 72: K-FLEX CLAD ® WT NS TECHNICAL INFO
Page 73 and 74: K-FLEX CLAD ® IN PERFECT FOR LNG A
Page 75 and 76: PHYSICAL PROPERTIES OF K-FLEX CLAD
Page 77 and 78: K-FLEX CLAD ® TAPE WT TECHNICAL IN
Page 79 and 80: K-FLEX DUCT ® LINER GRAYdesigned f
Page 81 and 82: K-FLEX DUCT ® LINER GRAY TECHNICAL
Page 83 and 84: THICKNESS RECOMMENDATIONS* - TO CON
Page 85: K-FLEX ECO a halogen-free insulatio
Page 89 and 90: K-FLEX ® ELASTOMERIC FOAM TAPE - E
Page 91 and 92: K-FONIKmaterials for noise reductio
Page 93 and 94: K-FONIK APPLICATION GROUPSNOISE BAR
Page 95 and 96: K-FONIK AB ACOUSTIC PERFORMANCENois
Page 97 and 98: K-FONIK GK/GV ACOUSTIC PERFORMANCEG
Page 99 and 100: SPECIFICATION BULLETINSTS1 Standard
show all

GENERAL CATALOG - K-Flex USA

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?