11.08.2015 Views

GS1 EPC Tag Data Standard 1.6 - Indicod-Ecr

GS1 EPC Tag Data Standard 1.6 - Indicod-Ecr

GS1 EPC Tag Data Standard 1.6 - Indicod-Ecr

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

3159316031613162316331643165316631673168316931703171317231733174317531763177317831793180BitPosition inSegmentField15 – 0 User MemorySize31 –16 BlockPermaLockBlock SizeDescriptionNumber of 16-bit words in user memory.If non-zero, the size in words of each block that maybe block permalocked. That is, the block permalockfeature allows blocks of N*16 bits to be locked, whereN is the value of this field.If zero, then the XTID does not describe the block sizefor the BlockPermaLock feature. The tag may or maynot support block permalocking.This field SHALL be zero if the Optional CommandSupport Segment (Section 16.2.3) is present and itsBlockPermaLockSupported bit is zero.Table 46. XTID Block PermaLock and User Memory Information16.3Serialized <strong>Tag</strong> Identification (STID)This section specifies a URI form for the serialization encoded within an XTID, calledthe Serialized <strong>Tag</strong> Identifier (STID). The STID URI form may be used by businessapplications that use the serialized TID to uniquely identify the tag onto which an <strong>EPC</strong>has been programmed. The STID URI is intended to supplement, not replace, the <strong>EPC</strong>for those applications that make use of RFID tag serialization in addition to the <strong>EPC</strong> thatuniquely identifies the physical object to which the tag is affixed; e.g., in an applicationthat uses the STID to help ensure a tag has not been counterfeited.16.3.1 STID URI GrammarThe syntax of the STID URI is specified by the following grammar:STID-URI ::= "urn:epc:stid:" 2*( "x" HexComponent "." ) "x"HexComponentwhere the first and second HexComponents SHALL consist of exactly threeUpperHexChars and the third HexComponent SHALL consist of 12, 16, 20, 24, 28,32, or 36 UpperHexChars.The first HexComponent is the value of the <strong>Tag</strong> Mask Designer ID (MDID) asspecified in Sections 16.1 and 16.2. The second HexComponent is the value of the <strong>Tag</strong>Model Number as specified in Sections 16.1 and 16.2. The third HexComponent is thevalue of the XTID serial number as specified in Sections 16.2 and 16.2.2. The number ofUpperHexChars in the third HexComponent is equal to the number of bits in theXTID serial number divided by four.Copyright ©2005- 2011 <strong>GS1</strong> AISBL, All Rights Reserved. Page 125 of 218

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!