GS1 EPC Tag Data Standard 1.6 - Indicod-Ecr

EPCURIurn:epc:id:sgln:CompanyPrefixLocationRefExtension13221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350GS1ElementString(414)Figure 10.Correspondence between SGLN EPC URI with extension and GS1 Element StringFormally, the correspondence is defined as follows. Let the EPC URI and the GS1element string be written as follows:EPC URI: urn:epc:id:sgln:d 1 d 2 …d L .d (L+1) d (L+2) …d 12 .s 1 s 2 …s KGS1 Element String: (414)d 1 d 2 …d 13CompanyPrefixLocationRef(254)s 1 s 2 …s KCheckDigitTo find the GS1 element string corresponding to an SGLN EPC URI:(254)1. Number the digits of the first two components of the EPC as shown above. Note thatthere will always be a total of 12 digits.2. Number the characters of the serial number (third) component of the EPC as shownabove. Each s i corresponds to either a single character or to a percent-escape tripletconsisting of a % character followed by two hexadecimal digit characters.3. Calculate the check digit d 13 = (10 – ((3(d 2 + d 4 + d 6 + d 8 + d 10 + d 12 ) + (d 1 + d 3 + d 5 +d 7 + d 9 + d 11 )) mod 10)) mod 10.4. Arrange the resulting digits and characters as shown for the GS1 Element String. Ifany s i in the EPC URI is a percent-escape triplet %xx, in the GS1 Element Stringreplace the triplet with the corresponding character according to Table 47 (AppendixA). (For a given percent-escape triplet %xx, find the row of Table 47 that containsxx in the “Hex Value” column; the “Graphic Symbol” column then gives thecorresponding character to use in the GS1 Element String.). If the serial numberconsists of a single character s 1 and that character is the digit zero (‘0’), omit theextension from the GS1 Element String.To find the EPC URI corresponding to a GS1 element string that includes a GLN (AI414), with or without an accompanying extension (AI 254):1. Number the digits and characters of the GS1 element string as shown above.Extension2. Determine the number of digits L in the GS1 Company Prefix. This may be done, forexample, by reference to an external table of company prefixes.3. Arrange the digits as shown for the EPC URI. Note that the GLN check digit d 13 isnot included in the EPC URI. For each serial number character s i , replace it with theCopyright ©2005- 2011 GS1 AISBL, All Rights Reserved. Page 45 of 218