GS1 EPC Tag Data Standard 1.6 - Indicod-Ecr

22502251225222532254225522562257225822592260226122622263HeaderValue(binary)0011 1100to0011 11110100 0000to0111 11111000 0000to1011 11111100 0000to1100 1101Header Value(hexadecimal)3Cto3F40to7F80toBFC0toCDEncodingLength(bits)NACoding SchemeReserved for future Header valuesReserved until 64 bit Sunset64 Reserved until 64 bit Sunset (64 header values)Reserved until 64 bit Sunset1100 1110 CE 64 Reserved until 64 bit Sunset 1100 1111to1111 1110CFtoFEReserved until 64 bit SunsetFollowing 64 bit Sunset, E2 remainsreserved to avoid confusion with the firsteight bits of TID memory (Section 16).1111 1111 FF NA Reserved for future headers longer than 8bitsTable 16. EPC Binary Header Values14.3Encoding ProcedureThe following procedure encodes an EPC Tag URI into a bit string containing theencoded EPC and (for EPC schemes that have a filter value) the filter value. This bitstring is suitable for storing in the EPC memory bank of a Gen 2 Tag beginning at bit 20 h .See Section 15.1.1 for the complete procedure for encoding the entire EPC memory bank,including control information that resides outside of the encoded EPC. (The procedure inSection 15.1.1 uses the procedure below as a subroutine.)Given:Yields:An EPC Tag URI of the form urn:epc:tag:scheme:remainderA bit string containing the EPC binary encoding of the specified EPC Tag URI,containing the encoded EPC together with the filter value (if applicable); ORAn exception indicating that the EPC Tag URI could not be encoded.Copyright ©2005- 2011 GS1 AISBL, All Rights Reserved. Page 82 of 218