11.08.2015 Views

GS1 EPC Tag Data Standard 1.6 - Indicod-Ecr

GS1 EPC Tag Data Standard 1.6 - Indicod-Ecr

GS1 EPC Tag Data Standard 1.6 - Indicod-Ecr

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

17171718171917201721172217231724172517261727172817291730173117321733173417351736173710.1Use of “Reserved” and “All Others” Filter ValuesIn the following sections, filter values marked as “reserved” are reserved for assignmentby <strong>EPC</strong>global in future versions of this specification. Implementations of the encodingand decoding rules specified herein SHALL accept any value of the filter values, whetherreserved or not. Applications, however, SHOULD NOT direct an encoder to write areserved value to a tag, nor rely upon a reserved value decoded from a tag, as doing somay cause interoperability problems if a reserved value is assigned in a future revision tothis specification.Each <strong>EPC</strong> scheme includes a filter value identified as “All Others.” This filter valuemeans that the object to which the tag is affixed does not match the description of any ofthe other filter values defined for that <strong>EPC</strong> scheme. In some cases, the “All Others” filtervalue may appear on a tag that was encoded to conform to an earlier version of thisspecification, at which time no other suitable filter value was available. When encoding anew tag, the filter value should be set to match the description of the object to which thetag is affixed, with “All Others” being used only if a suitable filter value for the object isnot defined in this specification.10.2Filter Values for SGTIN <strong>EPC</strong> <strong>Tag</strong>sThe normative specifications for Filter Values for SGTIN <strong>EPC</strong> <strong>Tag</strong>s are specified below.Type Filter Value Binary ValueAll Others (see Section 10.1) 0 000Point of Sale (POS) Trade Item 1 001Full Case for Transport 2 010Reserved (see Section 10.1) 3 011Inner Pack Trade Item Grouping for Handling 4 100Reserved (see Section 10.1) 5 101Unit Load 6 110Unit inside Trade Item or component inside aproduct not intended for individual saleTable 6.SGTIN Filter Values7 11110.3Filter Values for SSCC <strong>EPC</strong> <strong>Tag</strong>sThe normative specifications for Filter Values for SSCC <strong>EPC</strong> <strong>Tag</strong>s are specified below.Type Filter Value Binary ValueAll Others (see Section 10.1) 0 000Reserved (see Section 10.1) 1 001Full Case for Transport 2 010Reserved (see Section 10.1) 3 011Copyright ©2005- 2011 <strong>GS1</strong> AISBL, All Rights Reserved. Page 61 of 218

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!