GS1 EPC Tag Data Standard 1.6 - Indicod-Ecr

938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973urn:epc:id:gsrn:CompanyPrefix.ServiceReferenceExample:urn:epc:id:gsrn:0614141.1234567890Grammar:GSRN-URI ::= “urn:epc:id:gsrn:” GSRNURIBodyGSRNURIBody ::= PaddedNumericComponent “.”PaddedNumericComponentThe number of characters in the two PaddedNumericComponent fields must total 17(not including any of the dot characters).The GSRN consists of the following elements: The GS1 Company Prefix, assigned by GS1 to a managing entity. This is the same asthe GS1 Company Prefix digits within a GS1 GSRN key. The Service Reference, assigned by the managing entity to a particular servicerelation.6.3.7 Global Document Type Identifier (GDTI)The Global Document Type Identifier EPC scheme is used to assign a unique identity toa specific document, such as land registration papers, an insurance policy, and others.General syntax:urn:epc:id:gdti:CompanyPrefix.DocumentType.SerialNumberExample:urn:epc:id:gdti:0614141.12345.400Grammar:GDTI-URI ::= “urn:epc:id:gdti:” GDTIURIBodyGDTIURIBody ::= PaddedNumericComponent “.”PaddedNumericComponentOrEmpty “.” PaddedNumericComponentThe number of characters in the two PaddedNumericComponent fields must total 12(not including any of the dot characters).The Serial Number field of the GDTI-URI is expressed as a NumericComponent,which permits the representation of all characters permitted in the Serial Numberaccording to the GS1 General Specifications. GDTI-URIs that are derived from 96-bittag encodings, however, will have Serial Numbers that have no leading zeros (unless theentire serial number consists of a single zero digit). These limitations are described in theencoding procedures, and in Section 12.3.1.The GDTI consists of the following elements: The GS1 Company Prefix, assigned by GS1 to a managing entity. This is the same asthe GS1 Company Prefix digits within a GS1 GDTI key.Copyright ©2005- 2011 GS1 AISBL, All Rights Reserved. Page 34 of 218