GV-IPCam H.264

5 Use the Preset drop-down list to select the Preset points for theSequence.6 Use the Dwell Time drop-down list to select the staying time that thecamera stays at the Preset point. The dwell time ranges from 0 to 127seconds at an interval of 0.5 second.7 Use the Speed drop-down list to select the speed at which thecamera moves toward the Preset point.8 To configure another Sequence, repeat steps 3 to 8 and select adifferent Index number.9 Click Save to complete the settings.Starting and Stopping a SequenceTo start a Sequence, click the Option button (No. 6, Figure 6-15 selectAuto and select a Go Sequence number which you have set previously.To stop a Sequence, click on a Pan / Tilt Control button (No. 2, Figure 6-15) or the Home button (No. 3, Figure 6-15).98