GV-IPCam H.264

To enable the VSM connection:1. Activate Link: Enable the monitoring through VSM.2. Host Name or IP Address: Type the host name or IP address ofVSM.3. Port Number: Match the port to the Port 2 value on VSM. Or keepthe default value 5609.4. User Name: Type a valid username to log into VSM.5. Password: Type a valid password to log into VSM.6. Click Apply. The Connection Status should display “Connected” andconnected time.7. To establish connection to the second VSM, click the Connection 2tab and repeat the above steps for setup.These options you can also find on this VSM setting page:• Cease motion detection messages from: Stops notifying VSM ofmotion-triggered events.• Cease input trigger messages from: Note this function is notavailable for Mini Fixed Dome, Mini Fixed Rugged Dome, CubeCamera and Wireless Cube Camera. Stops notifying VSM of inputtriggeredevents.• Enable schedule mode: Starts the monitoring through VSM basedon the schedule you set in the Select Schedule Time section. Referto 13.5 Recording Schedule for the same settings.For related settings to activate the monitoring through VSM, see 13.1.2Motion Detection and 13.2.1 Input Settings, and 17.2 VSM.228