GV-IPCam H.264

To enable the Center V2 connection:1. Activate Link: Enable the monitoring through Center V2.2. Host Name or IP Address: Type the host name or IP address ofCenter V2.3. Port Number: Match the port to the Port 2 value on Center V2. Or keepthe default value 5551.4. User Name: Type a valid username to log into Center V2.5. Password: Type a valid password to log into Center V2.6. Click Apply. The Connection Status should display “Connected” andconnected time.7. To establish connection to the second Center V2 server, click theConnection 2 tab and repeat the above steps for setup.You can also find the following options on this Center V2 setting page:• Cease motion detection messages from: Stops notifying Center V2of motion-triggered events.• Cease input trigger messages from: Note this function is notavailable for Mini Fixed Dome, Mini Fixed Rugged Dome, CubeCamera and Wireless Cube Camera. Stops notifying Center V2 ofinput-triggered events.• Enable schedule mode: Starts the monitoring through Center V2based on the schedule you set in the Select Schedule Time section.Refer to 13.5 Recording Schedule for the same settings.For related settings to activate the monitoring through Center V2, see13.1.2 Motion Detection, 13.2.1 Input Setting, and 17.1 Center V2.226