23.08.2015 Views

GV-IPCam H.264

GV-IPCam H.264

GV-IPCam H.264

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

7PT Camera7.7 I/O Terminal BlockThe 3-pin terminal block, located on the back panel of the PT Camera,provides the interface to one digital input and one digital output. The I/Oterminal block can be used for applications such as motion detection, eventalerts via E-Mail and FTP, and center monitoring through Center V2 andVSM.7.7.1 Pin AssignmentThe pin assignment for the terminal block:Pin Function1 Output1232 GNDFigure 7-2 3 InputFor details on how to enable an installed I/O device, see 13.2 I/O Settings.7.7.2 Voltage Load Expansion (Optional)You can install a <strong>GV</strong>-Relay V2 to expand the maximum voltage load ofyour <strong>GV</strong>-PT110D. For details, see 7.7.2 Voltage Load Expansion.109

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!