GV-IPCam H.264

6PTZ CameraStarting and Stopping AutopanTo start an Auto Pan, click the Option button (No. 6, Figure 6-15), selectAuto and select a desired Auto Pan number. The PTZ Camera will firstreturn to the starting position of the selected Auto Pan and proceeds withthe selected Auto Pan movement.To stop Auto Pan, click the Option button (No. 6, Figure 6-15), select Autoand select Autopan Stop. Alternatively click on a Pan / Tilt Control button(No. 2, Figure 6-15) or the Home button (No. 3, Figure 6-15).Rebooting the CameraWhen the system crushes and fails to respond to the PTZ control panel,reboot the camera.1 Open the VISCA OSD Configuration dialog box.2 Click the Motor Reset button to reboot.3 Wait until the camera has panned and tilted its full range andreturned to the home point.101