GV-IPCam H.264

Important:1. If Dynamic IP Address or PPPoE is enabled, you need to knowwhich IP address the camera will get from DHCP server or ISP tolog in. If your camera is installed in the LAN, use the GV-IP DeviceUtility to look up its current dynamic IP address. See 11.1.1Checking the Dynamic IP Address. If your camera uses a publicdynamic IP address via PPPoE, use the dynamic DNS Service toobtain a domain name that is linked to the camera’s changing IPaddress first. For details on Dynamic IP Address and PPPoE, see13.7.1 LAN Configuration and 13.7.3 Advanced TCP/IP.2. If Dynamic IP Address or PPPoE is enabled and you cannotaccess the camera, you may have to reset it to the factory defaultand then perform the network settings again.To restore the factory settings, see 15.3 Restoring to FactoryDefault Settings.158