GV-IPCam H.264

Chapter 14 Recording and PlaybackNote this chapter and the function is not available for GV-MFD110The GV-IPCAM H.264 can record video and audio directly to the memorycard. You can play back the recorded files on the GV-System or over theTCP/IP network.Note: See Note for Recording at the beginning of the manual.14.1 RecordingTo enable the recording function:1. Insert the memory card to the camera. See “To add a memory card”,13.8.3 Storage Settings.2. If you like to set up the pre-recording, post-recording or audiorecording, see 13.1.1 Video Settings.3. If you like to set up the schedule for video recording or I/O monitoring,see 13.5 Recording Schedule.4. If you like to configure the areas and sensitivity values for motiondetection, see 13.1.2 Motion Detection.5. If you want the recording to be triggered by input device, configure theoperation of input device. See 13.2.1 Input Settings.6. To start recording and I/O monitoring, see 13.4 Monitoring.The camera will start recording in case of motion detection, I/O trigger, orduring the scheduled time.