GV-IPCam H.264

[Host Settings] Enter a descriptive name for the camera.[Auto Reboot Setup] Select Enable to activate automatic reboot andspecify the time for reboot in the sub fields.• Day Interval: Type the day interval between each reboot.• Reboot Time: Use the drop-down lists to specify the time forautomatic reboot.[Repair Record Database] Click Apply to repair the database when errorsoccur while playing back the recordings with the Remote ViewLog player.Problems can occur when there are errors in firmware or damages to theSD card.[Database Status] Displays the repairing status of database.[Firmware Update] This field displays the firmware version of the camera.[System Settings]• Load Default: Clicking the Load Default button to restore factorydefault settings. After applying the default settings configure thecamera’s network setting again.[Temperature Status]Note this function is not available for GV-BX110D, GV-MFD110 andCube Camera and Wireless Cube Camera. Displays the current chipsettemperature inside the camera.[Reboot] Clicking the Reboot button will make the camera performsoftware reset.264