23.08.2015 Views

GV-IPCam H.264

GV-IPCam H.264

GV-IPCam H.264

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

13Administrator Mode13.2 I/O SettingsNote the I/O settings are only available for Box Camera, Bullet Camera,PTZ Camera, PT Camera, Vandal Proof IP Dome and Fixed IP Dome.After installing the I/O device, you need to enable the I/O settings on thecamera. For how to install the I/O device on the camera, see the followingreference sections:<strong>GV</strong>-IPCAM <strong>H.264</strong>Box CameraBullet CameraPTZ CameraPT CameraVandal Proof IP DomeFixed IP DomeReference section2.6 I/O Terminal Block5.4.1 Connecting the Camera6.7 I/O Terminal Block7.7 I/O Terminal Block8.5 Connecting the Camera9.6 I/O Terminal Block13.2.1 Input SettingsTo activate the sensor input, select Enable.Figure 13-10215

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!