GV-IPCam H.264

Rotational AdjustmentFigure 8-710. Adjust image clarity using the GV-IP Device Utility program. Fordetails, see 11.2 Adjusting Image Clarity.11. Screw on the thread lock as shown in step 1.12. Replace the silica gel bag on the camera body within 2 minutes ofopening the silica gel bag package.13. Secure the housing cover to the camera body as shown in step 1.Note: Adjust the black mask inside the housing cover to make sure thecamera view is not obscured.Important:1. To prevent the lens from fogging up, you must replace the silicagel bag every time you open the camera. The gel bag loses itseffectiveness when the dry camera is opened.2. Make sure the housing cover is properly secured to prevent waterfrom entering and damaging the inner housing.120