GV-IPCam H.264

Chapter 15 Advanced ApplicationsThis chapter introduces more advanced applications.15.1 Upgrading System FirmwareGeoVision periodically releases updated firmware on the website. Simplydownload the new firmware into the GV-IPCAM H.264 using the Webinterface or IP Device Utility included in the Software CD.Important Notes before You StartBefore you start updating the firmware, please read these important notes:1. If you use the IP Device Utility for firmware upgrade, the computerused to upgrade firmware must be under the same network of thecamera.2. Stop monitoring of GV-IPCAM H.264.3. Stop all the remote connections including Center V2, VSM, ViewLogServer and 3GPP/RTSP.4. Stop the connection to GV-System.5. While the firmware is being updated,A) the power supply must not be interrupted, andB) do not unplug the Ethernet cable if the cable is the source ofpower supply (Power over Ethernet or PoE supported).WARNING: The interruption of power supply during updating causes notonly update failures but also damages to the camera. In this case, pleasecontact your sales representative and send your device back to GeoVisionfor repair.