GV-IPCam H.264

13Administrator Mode[LAN Configuration]Note the wireless option is only available in GV-CBW120 / 220. Accordingto the network environment, select Wired or Wireless. Before enabling theWireless option, follow the steps in 10.2 Configuring the WirelessConnection to configure the wireless settings first.[LAN Configuration]• Dynamic IP address: The network environment has a DHCP serverwhich will automatically assign a dynamic IP address to the camera.Click the Test DHCP button to see the currently assigned IP addressor look up the dynamic IP address using GV-IP Device Utility.• Static IP address: Assign a static IP or fixed IP to the camera. Typethe camera’s TCP/IP and DNS parameters in the Configureconnection parameters section.• PPPoE: The network environment is xDSL connection. Type theUsername and Password provided by ISP to establish the connection.If you use the xDSL connection with dynamic IP addresses, first usethe DDNS function to obtain a domain name linking to the camera’schanging IP address.[Configure connection parameters]Type the camera’s IP address, Subnet Mask, Router/Gateway, PrimaryDNS server and Secondary DNS server.ParametersDefaultWired Ethernet WirelessIP address 192.168.0.10 192.168.100.10Subnet Mask 255.255.255.0 255.255.255.0Router/Gateway 192.168.0.1 192.168.0.1Primary DNS server 192.168.0.1 192.168.0.1Secondary DNS server 192.168.0.2 192.168.0.2For details on Dynamic DNS Server Settings, see 13.7.3 Advanced TCP/IP.243