GV-IPCam H.264

5Bullet Camera4. If you want to insert a micro SD/SDHC card, follow the steps below.A. Loosen the fixing screw.Figure 5-17B. Slightly pull out the camera module.C. Insert a micro SD/SDHC card into the memory card slot.Figure 5-18D. Push the camera module back and fasten the fixing screw.5. Insert a new silica gel bag to the camera module and fasten thecamera’s cover within 2 minutes of opening the silica gel bag package.Note: The silica gel loses its effectiveness after you open the drycamera. To prevent the lens from fogging up, it is highly recommendedto replace the silica gel bag every time when you open the camera.71