23.08.2015 Views

GV-IPCam H.264

GV-IPCam H.264

GV-IPCam H.264

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

13Administrator Mode13.2.2 Output SettingsSelect Enable to start the output device. Choose the output signal thatmostly suits the device you are using: N/O (Open Circuit), N/C (GroundedCircuit), N/O Toggle, N/C Toggle, N/O Pulse or N/C Pulse. For Toggleoutput type, the output continues to be triggered until a new input triggerends the output. For Pulse output type, the output is triggered for theamount of time you specify in the Trigger Pulse Mode for x Seconds field.[Alarm Settings] You can choose to automatically trigger the digital outputunder these conditions: tampering alarm (not available for PTZ Cameraand PT Camera), disk write error (Rec Error) and full memory card (HDFull).Figure 13-11217

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!