GV-IPCam H.264

15Advanced Applications• To load system default settings:1. Unplug the power cable or the network cable (if it is also used as thepower supply).2. Press and hold the default button (No. 10, Figure 6-1).3. Power on the camera using the power cable or the PoE cable.4. Hold the default button until the two network LEDs fade. This will takeabout 25 seconds.Network LEDsFigure 15-175. When default loading is completed, the camera will pan and tilt to itsfull range and return to the home point.Vandal Proof IP Dome1. Use a pin to press and hold the default button on the inner housing.Default buttonStatus LEDFigure 15-182. Release the default button when the status LED blinks.285