3 months ago

UNIMIG Cat 2017 low res

BALANCERS 9368G - 9369G

BALANCERS 9368G - 9369G - 15-75 kg / 9370G - 9371G - 90-105 kg TECNA produces and distributes a complete range of BALANCERS having a capacity from 0,2 up to 180 kg and an available wire stroke up to 3 meters. The TECNA BALANCER is an essential device to eliminate the operator’s labour, to increase productivity by cutting down idle times and to improve the work quality. Furthermore, the use of the TECNA BALANCER reduces hoses and cables wear and avoid eventual damages to both people and tools. The application of the TECNA BALANCER is absolutely versatile: it may be used for bench or assembly line works and it may be suitably applied to small tools, industrial suspended welders and multiple screw drivers. The TECNA balancers are produced in conformity with the DIN 15112 Directive. Thanks to their high structural technology and their compliance with the laws in force, they are BG certified by the relevant German Institute for their safe use in the working environment. TECNA produces a new range of BALANCERS, ATEX certified, suitable to be installed in potentially explosive areas composed by flammable gases or combustible dusts. The ergonomic structure of the TECNA BALANCERS has been designed for facilitating each use operation, ranging from movement easiness to body robustness, from simple use to lifting power.TECNA, as producer, provides special and customised versions on demand. MAIN FEATURES • Rubbered protection. • Ribbed and sealed monobloc construction in aluminium alloy. • Stainless steel rope. • Adjustable capacity by means of a worm screw. • Auxiliary safety suspension. • Safety device against load dropping due to the spring breakage (>3kg). • Centrifugal safety device. • Upper rotary suspension with safety hook. • Locking device to block the load at any height. • Adjustable stroke limiting device. • Taper drum rotating on ball bearings. • Cable guide in antifriction material. • Rotary upper hook with ball bearing. • Inert spring drum assembly. • Polyamides thimble. ITEM 9368G 9369G 9370G 9371G Capacity kg 55-65 65-75 75-90 90-105 Stroke mm 2000 2000 2000 2000 Net weight kg 13.02 13.82 16.84 17.77 Gross weight kg 15 15.8 18.8 19.7 Package dimensions mm Additional equipment on demand: 455 270 280 455 270 280 455 270 280 455 270 280 104

Foot operated spot welders Items 4640-4644 - 16-25 kVA Rocker arm, foot operated, spot welder, with TE90 microprocessor welding control unit. Nominal power at 50% d.c. from 16 to 25 kVA Features TECNA spot welders are designed to meet every need of spot welding. The new stationary ergonomic frame designed by TECNA helps to facilitate the operator’s work. The control unit has been positioned frontally to allow the operator to view the welding data even during the working cycle. MAIN WELDER FEATURES • Arms adjustable in length allowing a better working flexibility. • Chrome-copper electrode-holders for long life and heavy duty service, designed for straight and angled fitting. • Adjustable electrode stroke. • Epoxy resin coated transformer. • Water-cooled transformer, arms and electrodes. • Microprocessor control unit TECNA TE90. • Adjustable electrode force; a microswitch starts the welding cycle when the desired pre-set value is reached. • The foot pedal is adjustable in length. 1 Year WARRANTY 2Years WARRANTY (Power Source) 105 W

KUMJR190 Operating Manual
What is Synergic Pulse MIG welding? - Victor Technologies - Europe
EN welding technology
BS USA low res cat 03-27-2017
PowerMaster SP Series Sales Brochure - Victor Technologies ...
Low Cost Torch Height Control Install and Setup Manual - CandCNC
Plasma equipment solutions from EsAB - ESAB Welding & Cutting ...
Training Articles Journal - Centricut
Operating instructions - EWM Hightec Welding GmbH
M1 - T1 & T3 GYS AUTO
Aristo® Mig 4004i Pulse Aristo® Feed 3004, U6/U8 Aristo ...
PT-31XL and PT-31XLPC Plasma Arc Cutting Torches
Operating instructions - EWM Hightec Welding GmbH
4. TIG Welding and Plasma Arc Welding
powermax65/85 - Rapid Welding and Industrial Supplies Ltd
Instructions - Sealey
The plasma welding process - Pro-Fusion Technologies, Inc.
Ingen bildrubrik - Mig Tig Arc Welding Supplies
CHAMPCUT 25 - Ador Welding Ltd
Champ cut 25 - Ador Welding Ltd
Origo™ Mag C171/C201/C251
Origo™ Mag C171/C201/C251
Product Catalogue - EWM Hightec Welding GmbH
4 - Oerlikon, the expert for industrial welding
Sistor82 - dpiaca
Mechanized Plasmarc Cutting Torch - ESAB Welding & Cutting ...
PT-37 - ESAB Welding & Cutting Products