Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Switchable VRD<br />
240 Volts Single Phase<br />
240 Volts Single Phase<br />
Spool Gun / Push Pull<br />
MULTI 250KT - PLUS CONCEPT<br />
AC/DC TIG<br />
DC Multifunction Pulse MIG Welding System<br />
DC TIG<br />
HF TIG<br />
AC/DC TIG<br />
Pulse MIG<br />
Welds: Steels, Stainless, Cast Iron, Bronze, Aluminium, Copper<br />
FEATURES<br />
HF Plasma Cut<br />
Synergic Smart Set<br />
Over Temperate control<br />
OFF<br />
ON<br />
P<br />
Spool Switchable Gun / Push VRDPull<br />
MMA DC Stick<br />
Synergic Pulse Program<br />
VRD<br />
Voltage Reduction Pulse DC TIG MIGDevice<br />
Standard MIG<br />
Push Pull Ready<br />
Over Temperate<br />
HF Plasma<br />
control<br />
Cut<br />
Lift Arc TIG<br />
Soft Touch Dial<br />
P<br />
Synergic Pulse Program<br />
MMA DC Stick<br />
Power Factor Correction<br />
Power Line Controller<br />
PLC PFC<br />
VRD I5amp<br />
Voltage Reduction Device<br />
240 Volts Single Phase<br />
Push Pull Ready<br />
4GR<br />
4 Geared Roller Drive<br />
I5amp<br />
Synergic 240 Volts Single Phase Pulse 240 MIG Volts Single Programs<br />
Phase<br />
Standard MIG/MAG<br />
Spool Gun / Push Pull<br />
High Speed Synergic Pulse MIG<br />
Twin Pulse<br />
OFF<br />
ON<br />
High Speed MIG/MAG<br />
Switchable HF TIG VRD<br />
AC/DC TIG<br />
Synergic MIG<br />
Spool Gun<br />
4GR<br />
DC Lift arc TIG with PULSE<br />
Manual 4 Geared Roller and Drive<br />
Synergic Smart Programs<br />
Set<br />
DC TIG<br />
Plasma Cut<br />
MMA Stick mode<br />
Manual and Synergic Programs<br />
4GR<br />
Hot Standard Start MIG/MAG/ Arc Force Spool 4 Gun Geared / Push Roller / Pull Anti Drive Sticking<br />
GWR<br />
Over Temperate OFF control<br />
Geared Wire Drive<br />
ON<br />
IOamp<br />
240 Volts Switchable Single Phase VRD<br />
Push Pull Ready<br />
Synergic Smart Set<br />
IOamp<br />
I5amp<br />
240 Volts Single Phase<br />
Pulse MIG<br />
HF TIG<br />
HF Plasma Cut<br />
P<br />
Synergic Pulse Program<br />
I5amp<br />
240 Volts Single Phase<br />
IOamp<br />
240 Volts Single Phase<br />
AC/DC TIG<br />
Synergic Smart Set<br />
IOamp<br />
240 Volts Single Phase<br />
Australian Standard Standards MIG<br />
VRD<br />
Voltage Lift Reduction HF Arc TIG TIGDevice<br />
Spool MMA Gun DC Stick<br />
Standard Pulse MIGMIG/MAG<br />
Push Pull Ready<br />
OFF<br />
ON<br />
Voltage Reduction I5amp Device<br />
AC/DC Switchable DC TIG TIG VRD<br />
240 Volts<br />
HF<br />
Single<br />
TIG<br />
Phase<br />
Spool Gun / Push Pull<br />
IOamp<br />
240 Volts<br />
AC/DC<br />
Single<br />
TIG<br />
Phase<br />
4GR PFC<br />
PLC<br />
Power Factor Correction<br />
PFC<br />
Digital Display<br />
CNC<br />
Australian Standard Standards MIG/MAG<br />
Power Factor Correction<br />
<br />
CNC Connection<br />
GWR CNC<br />
CNC Connection<br />
Geared Wire Drive<br />
Overview<br />
68<br />
Soft Touch Dial<br />
Touch Button<br />
4 Geared Roller Drive<br />
Lift Arc TIG<br />
Power Line Controller<br />
Plasma Cut<br />
Standard MIG<br />
Synergic<br />
Over Temperate<br />
Smart Set<br />
control<br />
DC TIG<br />
GWR<br />
Geared Wire Drive<br />
Soft Touch Dial<br />
Plasma Cut<br />
Manufactured in compliance<br />
to AS/NZ60974.1 / ISO/IEC<br />
Spool<br />
PLC<br />
Gun MMA / Push DC Pull Stick<br />
Over Temperate control<br />
Power Line Controller<br />
• Australian Variable Touch Spool Standards Button Gun Start Current Pulse MMA Standard MIGDC Stick MIGand Crater Standard Spool Current<br />
MIG/MAG Gun<br />
Digital Plasma Display Cut<br />
HF Soft Plasma Touch Cut Dial<br />
Plasma Cut<br />
HF Plasma Cut<br />
Touch Button<br />
Standard MIG<br />
• Robust trolley with cylinder rack & Spool drawer Gun as pictured<br />
Pulse MIG<br />
P GWR P<br />
Synergic Pulse Program<br />
Geared Wire Drive<br />
Synergic Pulse Program<br />
PLC<br />
Power Line Controller<br />
Soft Touch Dial<br />
4GR<br />
4 Geared Roller Drive<br />
HF Plasma Cut<br />
Spool Gun<br />
4 Geared Drive Roller<br />
• 2/4T Trigger Functions<br />
• Up Slope - Down Slope<br />
PHF TIG<br />
Synergic Pulse Program<br />
4GR<br />
Standard MIG/MAG<br />
4 Geared Roller Drive<br />
GWR<br />
Push Pull Ready<br />
Geared Wire Drive<br />
Plasma Cut<br />
Pulse MIG<br />
Synergic Smart Set<br />
AC/DC TIG<br />
HF Plasma Cut<br />
P<br />
Spool Gun / Push Pull<br />
Synergic Smart Set<br />
Synergic Pulse Program<br />
Spool Gun<br />
Pulse<br />
/ Push<br />
MIG<br />
Pull<br />
• Simple selection of welding programs<br />
Push Pull Ready<br />
• Simple interface for easy operation<br />
• Accepts wide voltage supply variations (170-270V)<br />
HF Plasma Cut<br />
Technical Data<br />
Power Supply / Phases 240v 1 Phase<br />
Rated Power<br />
9.1KVA<br />
Welding Current - MIG 20A /14V - 250A /27.5V<br />
Welding Current - MMA (A) 20A /21V - 220A /28.8V<br />
Welding Current - TIG (A) 10A /10V - 250A /20.0V<br />
Duty Cycle @ 40ºC<br />
40% @ 250 Amps<br />
100% @ 160 Amps<br />
No Load Voltage (V)<br />
90V<br />
Open Circuit Voltage (V) VRD On - 15V, VRD Off - 65V<br />
I ieff<br />
24.0 Amps<br />
TIG Arc Ignition<br />
Lift Arc<br />
Protection Class<br />
IP21S<br />
Insulation Class<br />
H<br />
2Years<br />
Standards ISO/IEC 60974-1<br />
Size (mm) 340 x 400 x 620<br />
Weight (kg) 24<br />
WARRANTY<br />
WARRANTY<br />
Digital Display<br />
The MULTI-250K is the most powerful multifunction single phase system that state of the art technology can provide. Offering multiple<br />
welding functions including Pulse MIG, Double Pulse MIG, High Speed MIG, DC TIG, and DC MMA (STICK). User friendly programs<br />
with synergic function are provided for all the welding processes making it suitable for even the inexperienced user. The Multi-250K <br />
CNC PLC GWR P<br />
Push Pull Ready<br />
Push Pull Ready<br />
encompasses all facets of the new PLUS CONCEPT technological development. PLUS CONCEPT is an innovative solution 2Years that is<br />
CNC Connection<br />
Power Line Controller<br />
Geared Wire Drive<br />
Synergic Pulse Program<br />
revolutionising the welding industry. Now, high efficiency welding is possible with Gas Metal Arc Welding, Pulse Arc and standard <br />
applications. The forced dynamism of the PLUS CONCEPT achieves an ultra fast transfer droplet rate into the weld pool giving <br />
surprising <strong>res</strong>ults: It increases significantly the welding speed (up to 45%) and, at the same time, it increases the penetration of the<br />
weld. Higher speed, better penetration and less spatter means less energy used during the deposit and reduced deformation during the<br />
Push Pull Ready<br />
welding. Double Pulse function provides the ability to produce welds with TIG like finish and with excellent control over the weld pool.<br />
WARRANTY<br />
Ideal for general engineers, boat building, sheet metal workshops, stainless steel fabricators, panel beaters and transport engineering<br />
workshops. Designed and built to meet with European norms conformity.<br />
1<br />
MACHINE PACKAGE: KTRPM250KT<br />
Standard option includes: Multi250, DM26-3M or DM26-4MSure Grip Logic MIG Torch, <br />
Earth / Arc Lead 35mm x 4m, UNI-MIG Twin Gauge Argon Regulator, Gas Hose, Trolley 2Years<br />
1Year<br />
Year<br />
WARRANTY<br />
WARRANTY<br />
(Power Source)
Change language