Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
WELDING CONSUMABLE<br />
Gasless - Self Shielding MIG Wi<strong>res</strong><br />
XA-E71TGS GASLESS MIG WIRE<br />
• No Shielding Gas Needed<br />
• Single Pass Welding of Thin Gauge Galvanized Steel<br />
• Excellent for Outdoor Use<br />
• Smooth Arc – Minimal Spatter<br />
• DC- Straight Polarity<br />
• Works Well in Windy Conditions<br />
<strong>UNIMIG</strong> E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on <br />
galvanized or carbon steel as thin as 20 gauge, without burn-through. Gasless wire E71T-GS is commonly used on small<br />
portable 240 Volt MIG welding machines, offering smooth arc action with very little spatter. Travel speed is fast, <br />
penetration is good and slag removal is easy <strong>UNIMIG</strong> E71T-GS is most popular for the home workshop welder because it<br />
works so well on 240 Volt machines and can be used on thin gauge steel.<br />
<strong>UNIMIG</strong> E71TGS Gasless MIG Wire<br />
Classification<br />
AWS A 5.20 : ASME SFA 5.20<br />
Part-No Description Spool Weight<br />
XA-E71TGS-08-1 0.8mm <strong>UNIMIG</strong> E71T-GS Gasless Wire 1kg<br />
XA-E71TGS-09-1 0.9mm <strong>UNIMIG</strong> E71T-GS Gasless Wire 1kg<br />
XA-E71TGS-08-5 0.8mm <strong>UNIMIG</strong> E71T-GS Gasless Wire 5kg<br />
XA-E71TGS-09-5 0.9mm <strong>UNIMIG</strong> E71T-GS Gasless Wire 5kg<br />
XA-E71T11 GASLESS MIG WIRE<br />
• No Shielding Gas Needed<br />
• Limited Multiple-Pass or Single-Pass Welding on Mild Steel<br />
• Excellent for Outdoor Use, Works Well In Windy Conditions<br />
• Smooth Arc, Minimal Spatter<br />
• Works on CC Power Sources and Voltage Sensing Wire Feeders<br />
• DC- Straight Polarity<br />
<strong>UNIMIG</strong> E71T-11 is a general purpose self-shielded flux-cored wire designed for all position, single-pass and limited<br />
multiple-pass lap, fillet and butt welds on mild or galvanized steed of less than ¾” thickness. (Do not use on steel<br />
plates thicker than ¾”). <strong>UNIMIG</strong> E71T-11 is easy to use because it requi<strong>res</strong> no shielding gas. It has a very stable arc,<br />
<strong>low</strong> spatter and slag removal is easy.<br />
<strong>UNIMIG</strong> E71T-11 is commonly used in the fabrication of structural beams on outdoor construction projects where<br />
adverse weather conditions hinder the f<strong>low</strong> of gas or where gas cylinders are not an option for logistical reasons. <br />
E71T-11 is also used in the fabrication of machinery parts, tanks, prefab construction and light structural framework.<br />
<strong>UNIMIG</strong> E71T11 Gasless MIG Wire<br />
Classification<br />
AWS A 5.20 : ASME SFA 5.20<br />
Part-No Description Weight<br />
XA-E71T11-08-5 0.8mm <strong>UNIMIG</strong> E71T-11 Gasless Wire 5kg<br />
XA-E71T11-09-5 0.9mm <strong>UNIMIG</strong> E71T-11 Gasless Wire 5kg<br />
XA-E7IT11-12-11 1.2mm <strong>UNIMIG</strong> E71T-11 Gasless Wire 15kg<br />
264
Change language