You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
OFF<br />
RAZOR DIGITAL 200 AC/DC<br />
TIG/MMA<br />
VRD<br />
OFF<br />
OFF ON<br />
I5amp ON IOamp<br />
I5amp<br />
ON<br />
IOamp<br />
Switchable VRD<br />
I5amp<br />
240 Volts Single Phase<br />
Voltage Reduction Device - Switchable Digital IOamp<br />
240 Volts Single Phase<br />
VRD<br />
240 Volts Inverter Single Phase<br />
240 Volts Single Welder<br />
Phase<br />
Switchable VRD<br />
240 Volts Single Phase<br />
240 Volts Single Phase<br />
Welds: Aluminium, Magnesium, Zinc Alloys, Steels, Stainless, <br />
Cast Iron, Bronze, Copper<br />
I5amp<br />
DC TIG IOamp<br />
FEATURES<br />
HF TIG<br />
AC/DC TIG<br />
Lift Arc TIG<br />
DC TIG<br />
HF TIG<br />
240 Volts<br />
DC<br />
Single<br />
TIG<br />
Phase<br />
240 Volts HF Single TIGPhase<br />
AC/DC TIG<br />
PFC 4GR<br />
Over Temperate control<br />
Power Factor Correction<br />
Over Temperate control<br />
104 Geared ~200 Roller Drive Amps Synergic Smart Set<br />
Over Temperate control<br />
HF TIG<br />
AC/DC TIG<br />
AC/DC TIG with HF ignition<br />
Duty Cycle 25% @ 200Amps<br />
AC/DC TIG<br />
Digital Display<br />
Weld Cycle Display<br />
4GR<br />
MMA DC Stick<br />
Australian Standards<br />
4 Geared MMA Roller DC Stick Drive<br />
MMA Stick mode - 10 ~ 160 Amps<br />
Standard MIG/MAG<br />
Duty MMA Cycle DC Stick 30% @ Standard 160Amps<br />
MIG/MAG<br />
Synergic Standard Smart MIG/MAG Set<br />
Spool Gun / Push Pull<br />
Standard MIG<br />
Touch Button<br />
VRD<br />
Standard Standard MIG/MAG<br />
Voltage Reduction Device<br />
74<br />
Soft Touch Dial<br />
Digital Display<br />
Soft Spool Touch Gun Dial<br />
PLC<br />
Lift Arc TIG<br />
PFC<br />
Power Line Controller<br />
Plasma Cut<br />
Power Factor Correction<br />
GWR<br />
Geared Wire Drive<br />
Australian Standards<br />
Touch Button<br />
Digital Display<br />
Touch button<br />
- 2T / 4T / SPOT<br />
Spool Gun<br />
Pulse MIG<br />
- AC Standard / OFF AC MIGPulse / DC Spool / Gun DC Pulse / Pulse MMA MIG<br />
Spool Gun Spool / Push GunPull<br />
ON<br />
Weld Switchable Cycle VRD<br />
240 Volts Single Phase<br />
- AC Square Wave 20 - 250Hz<br />
Plasma Cut<br />
HF Plasma Cut<br />
- AC Balance Control Adjustable<br />
Soft Touch Dial<br />
Plasma - Pulse Plasma MIGFrequency Cut<br />
HF Plasma 0.2 Cut- 200Hz<br />
- Pulse Width 10 - 90%<br />
DC TIG<br />
HF TIG<br />
- Base Current 10 - 200A<br />
- GWR Up Slope 0 -10 sec P<br />
Geared Wire Drive<br />
Synergic Pulse Program<br />
- Down Slope 0 -15 sec<br />
HF Plasma Cut<br />
- Pre Gas 0 - 3 sec<br />
Over Temperate control<br />
- Post Gas 0.5 -15 sec<br />
P<br />
MMA DC Stick<br />
Standard MIG<br />
Soft Touch Dial<br />
I5amp<br />
Push Pull Ready<br />
Synergic Pulse Program<br />
Manufactured in compliance<br />
to AS/NZ60974.1<br />
Push Pull Ready<br />
Pulse MIG<br />
Standard MIG/MAG<br />
Spool Gun<br />
Plasma Cut<br />
IOamp<br />
240 Volts Single Phase<br />
HF Plasma Cut<br />
AC/DC TIG<br />
Pulse MIG<br />
1<br />
HF Plasma Cut<br />
Year<br />
WARRANTY<br />
AC / AC Pulse / DC<br />
DC Pulse / MMA Selector<br />
2T / 4T / Spot<br />
Selector<br />
Technical Data<br />
Power Supply / Phases (V-Ph) 240V - 1 ±15%<br />
Rated Input Power (KVA) 6.0<br />
ieff (Amps) 15<br />
iMax (Amps) 29<br />
Rated Output 10-160A/26.4V MMA <br />
10-200A/18.0V TIG<br />
No-Load Voltage (V) 68<br />
Duty Cycle @ 40ºC as per AS/NZ60974<br />
Adjustment Knob<br />
25%@200Amps TIG<br />
30%@160Amps MMA<br />
Effciency (%) 85<br />
Power Factor 0.70<br />
Protection Class<br />
IP21S<br />
Insulation Class B<br />
Size (mm)<br />
426x162x326<br />
Weight (kg) 2Years<br />
10Kg3Years<br />
WARRANTY<br />
Overview <br />
The RAZOR200ACDC is a Digital Controlled Square Wave AC/DC TIG inverter welder. Intelligent digital control of the main functions<br />
are realised by software providing ease of operation and high accuracy. Full TIG functionality, offering simple step by step digital control<br />
of functions and parameters providing complete professional control. HF arc ignition provides pre-gas with instant arc ignition leaving<br />
no tungsten inclusion or contamination of the tungsten electrode. Digital set of Pre Gas Time, Start Current, Up Slope and Down Slope<br />
Time, Finish Current Level and Post Gas Time with the choice of 2T or 4T trigger function al<strong>low</strong>s control of the welding process at a<br />
professional level from start to finish. Digital Pulse Control gives full parameter setting of Peak & Base Current, Pulse Frequency & Pulse<br />
Width providing control of heat input, penetration & distortion. AC Square Wave Balance gives 2Years control of the electron f<strong>low</strong> at the <br />
tungsten, the AC TIG arc can be adjusted from maximum oxide-layer cleaning on aluminium through to a deeper penetrating weld. <br />
Remote Control Interface provides optional remote amperage control at the torch or foot-pedal control. DC MMA welding delivers a<br />
smooth and stable arc for easy welding of electrodes producing high quality welds including cast Iron, stainless and <strong>low</strong> hydrogen. <br />
Arc Ignition and Arc Force control al<strong>low</strong>s you to set the ideal arc condition no matter what electrode you choose. Optimised auto <br />
protection of the power input provides auto shut down of the machine when large scale fluctuations occur. Unique air channel design<br />
increases the heat dissipation of the power device, control circuits, minimises dust absorption, thereby greatly improving longevity and<br />
reliability. RAZOR200ACDC is the new standard for 240V AC/DC welders making it the ideal choice for experienced or novice welders of <br />
Aluminium, Stainless and Steel materials. Built to our specification 1and manufactured in compliance to AS/NZ60974.1<br />
MACHINE PACKAGE: KUMJRRZ200AC/DC<br />
Standard option includes: RAZOR200AC/DC Machine, SR26 TIG Torch x 4m, Earth Lead & Arc Lead 25mm x 4m, <br />
2Years<br />
UNI-MIG Argon F<strong>low</strong>meter Regulator, 2M Gas Hose with fittings<br />
3Years<br />
Year<br />
WARRANTY<br />
WARRANTY<br />
WARRANTY<br />
WARRANTY<br />
WARRANTY<br />
(Power Source)
Change language