You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
AC/DC TIG<br />
AC/DC OFF MULTIWAVE INVERTER WELDER<br />
ON<br />
Synergic Smart Set<br />
DIGITAL Switchable VRD 500Amp 240 Volts Single Phase AC/DC 240 Volts Single Phase Inverter Welder<br />
Welds: Aluminium, Magnesium, Zinc Alloys, Steels, Stainless, Cast Iron, Bronze,<br />
VRD<br />
Voltage Reduction DC TIG Device<br />
FEATURES<br />
Spool Gun / Push Pull<br />
Pulse MIG<br />
Over Temperate control<br />
Lift Arc TIG<br />
VRD I5amp<br />
PFC<br />
Voltage Reduction Device<br />
240 Volts Single Phase<br />
MMA HF Plasma DC Stick Cut<br />
Power Factor Correction<br />
P<br />
Synergic<br />
Lift<br />
Pulse<br />
Arc TIG<br />
HF TIGProgram<br />
Australian Standard Standards MIG<br />
4GR PFC<br />
Power Factor Correction<br />
4 Geared Roller Drive<br />
Push Pull Ready<br />
I5amp<br />
OFF<br />
Switchable HF TIG VRD<br />
4GR<br />
AC/DC Lift arc or HF TIG with PULSE<br />
Manual 4 Geared Roller and Drive<br />
Synergic Smart Programs<br />
Set<br />
DC TIG<br />
OFF<br />
ON<br />
ON<br />
MMA IOamp Stick modeI5amp<br />
Manual and Synergic Programs<br />
4GR<br />
Switchable VRD<br />
240 Volts Single Phase<br />
240 Volts Single Phase<br />
Hot Standard Start MIG/MAG/ Arc Force Spool 4 Gun Geared / Push Roller / Pull Anti Drive Sticking<br />
Over Temperate control<br />
Synergic Pulse Programs<br />
High Speed Synergic Pulse MIG <br />
DC TIG<br />
HF TIG<br />
AC/DC TIG<br />
Twin Pulse<br />
Spool MMA Gun DC Stick<br />
Synergic Over Temperate Smart Set control<br />
IOamp<br />
4 Geared Drive Roller<br />
I5amp<br />
240 AC/DC Volts TIG Single Phase<br />
HF TIG<br />
Standard Pulse MIGMIG/MAG<br />
4GR<br />
4 Geared Roller Drive<br />
IOamp<br />
240 Volts Single Phase<br />
AC/DC TIG<br />
IOamp<br />
240 Volts Single Phase<br />
Synergic Smart Set<br />
AC/DC TIG<br />
Spool Gun / Push Pull<br />
Synergic Smart Set<br />
Soft Touch Dial<br />
Touch Button<br />
PLC<br />
Australian Standards<br />
Standard MIG/MAG<br />
Power Line Controller<br />
Plasma Cut<br />
Standard MIG<br />
Manufactured in compliance<br />
to AS/NZ60974.1 / ISO/IEC<br />
MMA DC Stick<br />
GWR<br />
Spool Gun / Push Pull<br />
Geared Wire Drive<br />
HF Plasma Cut<br />
Spool Gun<br />
P<br />
Standard MIG/MAG<br />
Synergic Pulse Program<br />
Pulse MIG<br />
Spool Gun / Push Pull<br />
Digital Display<br />
Soft Touch Dial<br />
Plasma Cut<br />
HF Plasma Cut<br />
CNC<br />
Touch Button<br />
Spool Gun<br />
CNC Connection<br />
Digital Plasma Display Cut<br />
GWR CNC<br />
CNC Connection<br />
Geared Wire Drive<br />
PLC<br />
Standard MIG<br />
Pulse MIG<br />
Power Line Controller<br />
Soft Touch Dial<br />
HF Plasma Cut<br />
P<br />
Synergic Pulse Program<br />
PLC<br />
Power Line Controller<br />
Push Pull Ready<br />
Spool Gun<br />
GWR<br />
Push Pull Ready<br />
Geared Wire Drive<br />
Plasma Cut<br />
GWR<br />
Geared Wire Drive<br />
P<br />
Pulse MIG<br />
Synergic Pulse Program<br />
HF Plasma Cut<br />
Push Pull Ready<br />
P<br />
Synergic Pulse Program<br />
Push Pull Ready<br />
Technical Data<br />
Power Supply / Phases (V-Ph) 415V - 3 ±15%<br />
Regulation field in MMA mode Amp 20 - 320<br />
Regulation field in TIG DC mode Amp 5 - 500<br />
Regulation field in TIG AC mode Amp 12 - 500<br />
Regulation field in MIG-MAG Amp 10 - 400<br />
Balance TIG AC mode % 10 - 90<br />
Duty Cycle @ 40ºC as per AS/NZ60974-1 40%@500Amps TIG<br />
Rated secondary current A 500<br />
Permanent sec, current 100% @ 320<br />
Rated Power (MMA) KVA 21<br />
Permanent power 100% (MMA) KVA 14,3<br />
Frequency TIG AC mode Hz 20 - 200<br />
No load voltage (S) (K) V 92<br />
Max secondary current A 500<br />
2Years<br />
Short circuit limit A 550<br />
MMA electrode possibility mm 6.0<br />
Protection class Ip 21-S<br />
Insulation class<br />
H<br />
TIG ignition<br />
HF or Lift Arc<br />
Remote control<br />
Analog and Digital<br />
Width-Height-Length mm 310 x 1100x 1000<br />
Weight Kg 85<br />
WARRANTY<br />
WARRANTY<br />
Overview<br />
A High Powered 500AMP AC/DC Multifunction Welder with all the latest innovations and featu<strong>res</strong> of the Multi Wave family. <br />
The Multi Wave 500AMP has 40% duty cycle at 500amps and is ideal for fabrication in heavy applications. An industrial machine with <br />
multiple welding functions with Manual and Synergic selection of TIG AC/DC, Pulse TIG AC/DC, TIG Mix Arc with the innovative Multi<br />
Wave approach with the latest innovations that grant improvement in the quality and carry the <strong>res</strong>ults to the highest level with theminimum<br />
effort. MMA electrode featu<strong>res</strong> selection of DC+, DC- and AC with auto-change of welding polarity and synergic material<br />
thickness adjustment. The base power source includes built-in water cooling and can be used both in TIG and MIG/MAG. Addition of<br />
the MIG Wire Feeder provides synergic MIG/MAG and Pulse MIG function with the technology of Plus Concept.<br />
1<br />
MACHINE PACKAGE: KTRMW500AC/DC<br />
Standard option includes: Multi Wave 500AC/DC, SR18-4MCP50, Earth / Arc Lead 35mm x 4m, <br />
UNI-FLAME Argon F<strong>low</strong>meter Regulator, Gas Hose<br />
80<br />
1Year<br />
Year<br />
WARRANTY<br />
2Years<br />
WARRANTY<br />
2Years<br />
WARRANTY<br />
(Power Source)
Change language