UNIMIG Cat 2017 low res

WELDING CONSUMABLE
Stainless Steel Electrodes
EI 316L STAINLESS ELECTRODE
• Soft Start and Restrike
• Stable Arc
• Minimal Spatter
• Easy to Control Weld Deposition
• Easy Slag Removal
• Fine Ripple Bead Appearance
• International Approvals
• All Positions
Classification
AWS/ASME SFA 5.4 E316L-16 • AS/NZ 4854 • EN1600 E 1912 3 LR 32 • DIN 8556 E1912 3 LR26 • TS2716 E 1912 3 LR26
An electrode for welding austenitic stainless Cr-Ni-Mo steels or cast steels having an extra low carbon content. For ­
operating temperatures of up to +400˚C. Especially suitable for welding of stainless steel chemical tanks and pipes in
chemical, textile, paint and paper industries. Possible to use equally well both with AC and DC. Easy arc striking and
restriking. Fine metal droplet transfer, good fusion of joint faces, finely rippled bead surface, easily removable slag.
Typical Mechanical Properties of Weld metal
Tensile Strength Elongation Impact Energy ISO - V (J)
560N/mm² 37% 70+20°C
EI 308L Stainless Steel Electrode
Part-No Description Pkt Weight
EI316L-2.5MM-1.75KG MAGMAWELD 2.5mm 1.75KG
EI316L-3.2MM-2KG MAGMAWELD 3.2mm 2KG
EI316L-3.2MM-1.75KG MAGMAWELD 3.2mm 1.75KG
Typical Weldmetal Analysis
C 0.04% Si 0.70% Mn: 0.80% Cr 19% Ni 12.0% Mo 2.6%
DC+
AC
EI 312 STAINLESS ELECTRODE
• Dissimilar Problem Steel Welding
• Stable Arc
• Minimal Spatter
• Easy to Control Weld Deposition
• Easy Slag Removal
• Fine Ripple Bead Appearance
• International Approvals
• All Positions
Classification
AWS/ASME SFA 5.4 E312-16 • EN1600 E 29 9 R 12 • DIN 8556 E29 9 R26 • TS2716 E29 9 R26
An electrode for joining dissimilar steels and depositing claddings on ferritic steels. The ferritic-austenitic Cr-Ni weld
metal contains approximately 50% of delta-ferrite and is non-scaling up to +1100˚C. High resistance to cracking and is
suited for joining difficult to weld steels and depositing buffer layers on crack sensitive base metals. Easy arc striking and ­
restriking. Fine metal droplet transfer, good fusion of joint faces, finely rippled bead surface and easy slag removal.
Typical Mechanical Properties of Weld metal
Tensile Strength Elongation Impact Energy ISO - V (J)
810N/mm² 24% 50 +20°C
EI 312 Stainless Steel Electrode
Part-No Description Pkt Weight
EI 312-2.5MM-1.75KG MAGMAWELD 2.5mm 1.75KG
EI 312-3.2MM-1.75KG MAGMAWELD 3.2mm 1.75KG
EI 312-4.0MM-2KG MAGMAWELD 4.0mm 2.KG
Typical Weldmetal Analysis
C 0.10% Si 0.90% Mn: 0.10% Cr 29% Ni 10.0%
DC+
AC
280