You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Switchable VRD<br />
RAZORWELD ARC 200<br />
MMA/TIG - 200 Amp DC Inverter Welder<br />
DC TIG<br />
HF TIG<br />
AC/DC TIG<br />
Welds: Steels, Stainless, Cast Iron, Bronze, Copper<br />
FEATURES<br />
Over Temperate control<br />
MMA DC Stick<br />
VRD I5amp<br />
Voltage Reduction Device<br />
240 Volts Single Phase<br />
VRD<br />
Standard MIG<br />
Voltage Reduction Device<br />
Lift Arc TIG<br />
HF OFF TIG<br />
VRD<br />
4GR PFC<br />
Voltage Reduction Device<br />
PLC<br />
PFC<br />
Soft Touch OFF Dial ON<br />
ON<br />
Switchable VRD<br />
Switchable Lift Arc TIG VRD<br />
Power Factor Correction<br />
4 Geared Roller Drive<br />
Power Line Controller<br />
Lift Arc TIG<br />
Power Factor DC TIG Correction<br />
DC TIG<br />
Australian Standards<br />
Standard MIG/MAG<br />
PFC<br />
Power Factor Correction<br />
Over Temperate control<br />
Australian Standards<br />
Over Temperate control<br />
Touch Button<br />
Spool Gun<br />
Australian Standards<br />
MMA DC Stick<br />
CNC<br />
Touch Button<br />
Standard MIG<br />
GWR<br />
Digital Display<br />
CNC Standard Connection MIG<br />
Geared Wire Drive<br />
CNC<br />
CNC Digital Connection Display<br />
Soft Touch Dial<br />
CNC PLC<br />
PLC<br />
CNC Connection<br />
Power Line Controller<br />
Power Line Controller<br />
I5amp<br />
240 Volts Single Phase<br />
4GR<br />
4 Geared Roller Drive<br />
MMA Stick mode - 10 ~ 200Amps<br />
Duty Cycle 30% @ 200Amps<br />
Hot Standard Start MIG/MAG/ Arc Force<br />
Spool Gun / Push Pull<br />
OFF<br />
Fitted IOamp with a 15AMP Plug<br />
Switchable VRD<br />
240 Volts Single Phase<br />
OFF<br />
Spool Gun<br />
DC Lift Arc TIG mode<br />
Switchable VRD<br />
240 Volts Single Phase<br />
Duty Cycle 45% @ 200Amps<br />
DC<br />
OFF<br />
TIG<br />
AC/DC TIG<br />
ON<br />
Plasma Cut<br />
I5amp<br />
Selectable Switchable VRD VRD ON/OFF<br />
240 Volts Single Phase<br />
I5amp<br />
240 Volts Single Phase IOamp<br />
240 Volts Single Phase<br />
Voltage 240 Volts Single DC TIG Phase Reduction 240 Volts Single Device<br />
HF TIG<br />
Phase<br />
Over Temperate control<br />
GWR<br />
Synergic Smart Set<br />
Geared Wire Drive<br />
ON<br />
PFC (Power Factor Correction)<br />
DC TIG<br />
HF TIG<br />
for maximum HF TIG electrical 4 AC/DC Geared TIG Roller Drivefficiency<br />
HF TIG<br />
MMA DC Stick<br />
Spool Gun / Push Pull<br />
4GR<br />
4GR<br />
4 Geared Over Temperate Roller Drivecontrol<br />
MMA DC Stick<br />
4 Geared Roller Drive<br />
Over Temperature warning<br />
Standard MIG<br />
Pulse MIG<br />
Manufactured in compliance<br />
to AS/NZ60974.1<br />
MMA DC Stick<br />
Standard MIG/MAG<br />
PLC P<br />
Standard MIG<br />
Spool Gun<br />
Soft Touch Dial<br />
Power Spool Line GunController<br />
Synergic Pulse Program<br />
PLC<br />
Power Soft Line Touch Controller Dial<br />
Plasma Cut<br />
PLC<br />
Power Line Controller<br />
GWR<br />
Geared Wire Drive<br />
GWR<br />
IOamp<br />
240 Volts Single Phase<br />
Synergic Smart Set<br />
I5amp<br />
240 Volts Single Phase<br />
Pulse MIG<br />
HF TIG<br />
I5amp<br />
HF Plasma Cut<br />
IOamp<br />
4GR<br />
P<br />
4 Geared Roller Drive<br />
Synergic Pulse Program<br />
4GR<br />
AC/DC TIG<br />
Standard MIG/MAG<br />
4GR<br />
4 Geared Roller Drive<br />
Push Pull Ready<br />
Synergic Smart Set<br />
Spool Gun<br />
Standard MIG/MAG<br />
Spool Gun / Push Pull<br />
Touch MMA Button DC Stick<br />
Standard<br />
Standard<br />
MIG/MAG<br />
MIG<br />
Spool Gun /<br />
Spool<br />
Push<br />
Gun<br />
Pull<br />
• Single PCB construction<br />
Digital Display<br />
Soft Touch Dial<br />
Plasma Cut<br />
Plasma Cut<br />
HF Plasma Cut<br />
• Auto-compensation for voltage fluctuation<br />
Soft Touch Dial<br />
Over Temperate control<br />
Plasma Cut<br />
Push Pull Ready<br />
Geared Wire Drive<br />
ON<br />
I5amp<br />
Standard MIG/MAG<br />
Synergic Smart Set<br />
Spool Gun<br />
Pulse MIG<br />
GWR<br />
Plasma Cut<br />
Pulse Geared MIG Wire Drive<br />
GWR<br />
Geared Plasma Wire Drive Cut<br />
HF Plasma Cut<br />
HF Plasma Cut<br />
P<br />
Geared Wire Drive<br />
Synergic Pulse Program<br />
Synergic Pulse Program<br />
GWR<br />
IOamp<br />
240 Volts Single Phase<br />
IOamp<br />
240 Volts Single Phase<br />
AC/DC TIG<br />
IOamp<br />
240 Volts Single Phase<br />
AC/DC TIG<br />
Synergic Smart Set<br />
AC/DC TIG<br />
Synergic Smart Set<br />
Spool Gun / Push Pull<br />
Synergic Smart Set<br />
Spool Gun / Push Pull<br />
Pulse MIG<br />
Spool Gun / Push Pull<br />
Pulse MIG<br />
HF Plasma Cut<br />
P<br />
Pulse MIG<br />
HF Plasma Cut<br />
Synergic Pulse Program<br />
• Minimal harmonic feedback to power grid<br />
• Generator use with pure sine wave generator only<br />
P<br />
1<br />
Synergic HF Pulse Plasma Program Cut<br />
Push Pull Ready<br />
P<br />
Synergic Pulse Program<br />
WARRANTY<br />
Push Pull Ready<br />
Year<br />
VRD Indicator<br />
Over Temperature Light<br />
MMA / TIG Toggle Switch<br />
Amperage Control<br />
Technical Data<br />
Power Supply / Phases (V-Ph) 240V - 1 ±15%<br />
Rated Input Power (KVA) 9.0<br />
Ieff 15A<br />
Rated Output<br />
200A/28V MMA<br />
200A/18V TIG<br />
Welding Current Range 10~200A<br />
No-Load Voltage (V) 9<br />
Duty Cycle @ 40ºC MMA<br />
30%@200Amps<br />
100%@110Amps<br />
Duty Cycle @ 40ºC TIG<br />
45%@200Amps<br />
100%@134Amps<br />
Power Factor 0.99<br />
Protection Class<br />
IP21S<br />
Insulation Class<br />
F<br />
Size (mm) 365 x 227 x 135<br />
Weight (kg) 6.5<br />
2Years 3Years<br />
WARRANTY<br />
ARC200PFC Standard option<br />
WARRANTY<br />
Overview<br />
Push Pull Ready<br />
The ARC200 is an inverter-based welding machine produced using the latest in IGBT technology. This machine is reliable, robust and<br />
stacked with featu<strong>res</strong> that you can expect from a quality welder. The DC MMA welding capability delivers a smooth and incredibly <br />
stable arc al<strong>low</strong>ing easy welding with electrodes producing high quality welds including cast Iron, stainless and <strong>low</strong> hydrogen. The<br />
ARC200 is equipped with DC Lift Arc TIG function, connection of the 26V TIG torch al<strong>low</strong>s 2Years quality DC TIG welding of steel, stainless<br />
steel, bronze and copper. The Lift Arc function is superb and delivers perfect arc ignition every time without any sticking of the tungsten <br />
electrode to the work piece, a remarkably smooth stable arc produces high quality TIG welds. The ARC200 is an exceptional machine<br />
that is suitable for a wide range of industrial applications including, site welding, farming, along with repair and maintenance <br />
applications. ARC200 is packaged in a Razorweld carry bag with your choice of MMA option accessories or MMA/TIG option <br />
accessories. The ARC200 gives you the best of both worlds with great portability and the power to get the job done.<br />
Built to our specification and manufactured in compliance to AS/NZ60974-1<br />
Product Code: KUMJRRW200CA<br />
MMA option includes: ARC200 Machine, Earth Lead & Arc 1Lead 25mm x 4m, Razorweld Carry Bag<br />
Product Code: KUMJRRW200CT<br />
TIG option includes: ARC200 Machine, Earth Lead & Arc Lead 25mm x 4m, 26V x 4m TIG 2Years Torch, <br />
UNI-FLAME Argon F<strong>low</strong>meter Regulator and Razorweld carry bag<br />
24<br />
Push Pull Ready<br />
Push Pull Ready<br />
Year<br />
WARRANTY<br />
WARRANTY<br />
WARRANTY<br />
3Years<br />
WARRANTY<br />
(Power Source)
Change language