UNIMIG Cat 2017 low res

WELDING CONSUMABLE
ER70S-6 Steel TIG Rods
TG2 - ER70S-6 TIG WIRE
• High Quality
• X-Ray Quality
• Clean Weld Finish
• International Approvals
Classification
AWS/ASME SFA 5.18 ER70S-6 • DIN 8559 WSG-2 • EN1688 W3 Si • M.No. 1.5125
Unalloyed welding rod for TIG welding of general structural steels and pipe steels. TG2 must be welded using pure
Argon (Ar) shielding gas. Thin and homogeneous copper coating increase resistance to rusting
TG2 E70S-6 TIG Filler Wire
Part-No Description Weight
TG2ER70S-6-1.6 ER70S-6 TIG Rod x 1.6mm 5.0kg
TG2ER70S-6-2.4 ER70S-6 TIG Rod x 2.4mm 5.0kg
TG2-102 - ER70S-2 TIG WIRE
• High Quality
• Micro Alloyed
• Triple De-oxidised
• X-Ray Quality
• Clean Weld Finish
• International Approvals
TG102
Classification
AWS/ASME SFA 5.18 ER70S-2 • TS EN ISO 636 -A W 42 2 W2Ti • EN ISO 636-A W 42 2 W2Ti
Micro-alloyed welding rod for GTAW (TIG) welding of unalloyed steels by using Argon shielding gas. Due to it's Ti and
Al micro alloy contents, particularly suitable for single pass welding of galvanized, pre-painted, rusty and dirty steels,
welding low alloy steels in pipe-lines, boilers and tank construction. Suitable also welding in thin metal plates and repair
welds.
TG102 E70S-2 TIG Filler Wire
Part-No Description Weight
TG102ER70S-2-1.6 ER70S-2 TIG Rod x 1.6mm 5.0kg
TG102ER70S-2-2.4 ER70S-2 TIG Rod x 2.4mm 5.0kg
TG4 - ER70S-4 TIG WIRE
• Use DC (-) Polarity
• Double De-oxidised
• Welded with Pure Argon as the sheilding gas
Classification
AWS/ASME SFA 5.18 ER70S-6 • JIS Z3316 YGT 50
It is designed for welding of mild and high tensile steel or 490 N/mm2 grade steel. It is suitable for root pass welding of
pipes and all welding thin plates
TG4 E70S-4 TIG Filler Wire
Part-No Description Weight
TG4ER70S-4-1.6 ER70S-4 TIG Rod x 1.6mm 5.0kg
TG4ER70S-4-2.4 ER70S-4 TIG Rod x 2.4mm 5.0kg
268