Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
VRD<br />
Voltage Reduction Device<br />
Switchable VRD<br />
240 Volts Single Phase<br />
240 Volts Single Phase<br />
OFF<br />
VIPER 200 DC TIG<br />
OFF<br />
200 Switchable Amp VRD ON<br />
TIG/MMA 240 Volts Single Phase Welder<br />
240 Volts Single Phase<br />
Lift Arc TIG<br />
ON<br />
I5amp<br />
I5amp<br />
DC TIG<br />
IOamp<br />
IOamp<br />
AC/DC TIG<br />
Switchable VRD<br />
240 Volts Single Phase<br />
240 Volts Single Phase<br />
Welds: Carbon Steels, Stainless Steels, Cast Iron, Bronze, Copper<br />
HF TIG<br />
PFC<br />
Power Factor Correction<br />
I5amp<br />
DC TIG<br />
Over HF Temperate TIG control<br />
AC/DC TIG<br />
IOamp<br />
FEATURES<br />
240 Volts<br />
DC<br />
Single<br />
TIG<br />
Phase<br />
240 Volts HF Single TIGPhase<br />
AC/DC TIG<br />
VRD<br />
OFF<br />
ON<br />
I5amp IOamp<br />
Voltage Over Reduction Device<br />
Switchable VRD<br />
240 Volts Single Phase<br />
Australian<br />
Temperate<br />
Standards<br />
control DC<br />
4GR<br />
TIG with HF ignition - 10 ~200 240 Volts Amps<br />
Single Phase<br />
MMA DC Stick<br />
Standard MIG/MAG<br />
Duty 4 Geared Cycle Roller Drive 30% Synergic @ 200Amps<br />
Smart Set<br />
Over Temperate control<br />
HF TIG<br />
AC/DC TIG<br />
Digital Display<br />
TIG / MMA Selector<br />
Amperage Selector<br />
Pulse Hz Selector<br />
4GR<br />
MMA DC Stick<br />
Lift Arc TIG<br />
Touch Button<br />
4 Geared MMA Roller DC Stick Drive<br />
MMA Stick mode - 10 ~ 160 Amps<br />
Standard MIG/MAG<br />
DC TIG<br />
HF TIG<br />
Duty Standard Cycle MIG 20% @ 160Amps<br />
Spool Gun<br />
Synergic Standard Smart MIG/MAG Set<br />
Spool Gun / Push Pull<br />
AC/DC TIG<br />
Pulse MIG<br />
PFC<br />
Power Factor Correction<br />
Standard MIG<br />
Digital Display<br />
Digital display<br />
Over Temperate control<br />
Spool Gun<br />
Soft Touch Dial<br />
Pulse MIG<br />
Plasma Cut<br />
HF Plasma Cut<br />
Standard Standard MIG/MAG<br />
VRD<br />
Voltage Reduction Device<br />
Australian Standards<br />
Soft Touch Dial<br />
Soft Spool Touch Gun Dial<br />
PLC<br />
Lift Arc TIG<br />
Touch Button<br />
Power Line Controller<br />
PFC<br />
Plasma Cut<br />
I5amp<br />
Power Factor Correction<br />
240 Volts Single Phase<br />
GWR<br />
Digital Display<br />
Geared Wire Drive<br />
Australian Standards<br />
HF TIG<br />
4GR<br />
4 Geared Roller Drive<br />
Touch Button<br />
Standard MIG/MAG<br />
Digital Display<br />
Spool Gun Spool / Push GunPull<br />
OFF<br />
Pulse Frequency ON Adjustable 0.2 - 200 Hz<br />
I5amp IOamp<br />
Down<br />
Switchable<br />
slope<br />
VRD<br />
Adjustable<br />
240 Volts Single Phase<br />
0 - 5 sec<br />
240 Volts Single Phase<br />
MMA DC Stick<br />
Standard MIG/MAG<br />
Postgas Plasma Cut Adjustable HF Plasma 1 Cut - 10 sec<br />
Pulse Plasma MIG Cut<br />
Touch button<br />
- 2T / 4T<br />
- Pulse DC TIG - TIG/MMA<br />
GWR<br />
Standard MIG<br />
- Remote select<br />
Geared Wire Drive<br />
HF Plasma Cut<br />
P<br />
240 Over Volts Temperate Single Phase control<br />
Soft Touch Dial<br />
Synergic Pulse Program<br />
MMA DC Stick<br />
AC/DC TIG<br />
Synergic Smart Set<br />
Standard MIG<br />
Spool Gun Soft / Push Touch Pull Dial<br />
PHF TIG<br />
Spool Gun<br />
Synergic Pulse Program<br />
Plasma Cut<br />
Push Pull Ready<br />
Manufactured in compliance<br />
to AS/NZ60974.1<br />
Push Pull Ready<br />
Pulse MIG<br />
HF Plasma Cut<br />
Fitted IOamp with a 15AMP Plug<br />
Standard MIG/MAG<br />
Spool Gun<br />
Plasma Cut<br />
AC/DC TIG<br />
Pulse MIG<br />
HF Plasma Cut<br />
Pulse MIG<br />
HF Plasma Cut<br />
2T / 4T Trigger<br />
Selector<br />
Pulse Selector<br />
Remote Control<br />
Selector<br />
Post Gas<br />
Arc Force Selector<br />
Technical Data<br />
Power Supply / Phases (V-Ph) 240V - 1 ±15%<br />
Rated Input Power (KVA) 8.0<br />
ieff (Amps) 15.0<br />
Down Slope<br />
Selector<br />
iMax(Amps) 34.0<br />
Rated Output<br />
10-160A/27.2V MMA<br />
10-200A/18.0V TIG<br />
No-Load Voltage (V) 75<br />
Duty Cycle @ 40ºC TIG<br />
30%@200 Amps<br />
100%@110Amps<br />
Duty Cycle @ 40ºC MMA 20%@160 Amps <br />
100%@72Amps<br />
Protection Class<br />
IP21S<br />
Insulation Class F<br />
Size (mm) 420 x 160 x 330<br />
Weight (kg)<br />
7.5kg<br />
Spool Gun<br />
Pulse MIG<br />
Overview<br />
The VIPER TIG200P is an inverter-based DC TIG welding machine with HF arc ignition and pulse capability. Produced using the latest in<br />
IGBT technology this <strong>low</strong> cost and portable machine is reliable, robust and stacked with all the functions you expect from a professional DC<br />
TIG welder. The HF arc ignition provides pre gas and instant arc ignition with the p<strong>res</strong>s of the torch switch leaving no tungsten inclusion and<br />
Plasma Cut<br />
HF Plasma Cut<br />
no contamination of the tungsten electrode. The Down Slope, Post Gas functions combined with the 2/4T trigger function al<strong>low</strong>s you to <br />
control the start and finish of the weld process at a professional level. The addition of adjustable pulse frequency 0.2-200Hz gives you the<br />
added capability to control the heat input into the work, control penetration and help control distortion. Torch Remote Control Interface <br />
provides GWRremote amperage Pcontrol<br />
from the torch in both static and live welding modes. The remote control receptacle provides optional<br />
Geared Wire Drive<br />
Synergic Pulse Program<br />
connection of foot control. Combining the functions of the VIPER 200P ensu<strong>res</strong> comprehensive control of the welding parameters when <br />
welding all DC weldable materials giving a remarkably smooth arc producing high quality TIG welds. The DC MMA welding capability delivers<br />
a smooth and stable arc al<strong>low</strong>ing easy welding with electrodes obtaining high quality welds including cast Iron, stainless and <strong>low</strong> hydrogen.<br />
The VIPER TIG200P is a professional machine that is suitable for multiple applications; stainless steel fabrication, light industrial use, site<br />
welding, repair and Push maintenance Pull Ready applications.<br />
Built to our specification and manufactured in compliance to AS/NZ60974.1<br />
MACHINE PACKAGE: KUMJRVT200P<br />
VIPER TIG 200P, SR26 4M Sure Grip TIG Torch, Argon F<strong>low</strong>meter Regulator, Arc Lead Set 25mm x 4m,<br />
1<br />
WARRANTY<br />
28<br />
(Power Source)<br />
Year
Change language