UNIMIG Cat 2017 low res

WELDING CONSUMABLE
General Purpose Electrodes
ESR-11 E6013 GENERAL PURPOSE ELECTRODE
• All Position
• Extremely Stable Arc
• Good Arc Starting and Restrike
• Self Releasing Slag
• Low Spatter Level
• Good Weld Bead Appearance
• International Approvals
Classification
AWS SFA A-5.1 E6013 • AWS/ASME SFA-5.1 E6013 • DIN 1913 E43 22 R(C)3
General-purpose electrode for structural steelwork, workshop and maintenance welding. Easily operated in positional
welding, including vertically-down. Good gap-bridging and smooth arc, well suited for tack-welding due to it's easy arc
striking and restriking properties. Welds are smooth, slightly concave and blending into base metal without ­
undercutting. Suitable for welding on galvanized, primer painted and slightly rusted components.
Typical Mechanical Properties of Weld Metal
Typical Weldmetal Analysis
Yield Stress Tensile Strength Elongation Impact Energy ISO - V (J)
C: 0.08% Si: 0.3% Mn: 0.5%
480Nmm2 530N/mm2 27% 80@0°C
ESR-11 GP Electrodes
Part-No Description Pkt Weight
ESR-11-2.5MM-2.5KG MAGMAWELD 2.5mm 2.5KG
ESR-11-2.5MM-5KG MAGMAWELD 2.5mm 5KG
ESR-11-3.2MM-2.5KG MAGMAWELD 3.2mm 2.5KG
ESR-11-3.2MM-5KG MAGMAWELD 3.2mm 5KG
ESR-11-4.0MM-6.5KG MAGMAWELD 4.0mm 6.5KG
DC -
AC
ESC60 E6010 CELLULOSIC ELECTRODE
• All Position
• Deep Penetration
• Easy to Control
• Good Weld Finish
• International Approvals
Classification
AWS/ASME SFA 5.1 E6010 • EN499 E 35 2 C 21 • DIN 1913
A medium coated cellulosic type electrode for welding. Due to it's high penetration it is suitable for root pass and build
up passes in the vertical down direction. For use in shipbuilding, storage vessels, boilers, pipeline constructions and ­
assembly works. DCEN (-) is recommended for root passes
Typical Mechanical Properties of Weld metal
Yield Stress Tensile Strength Elongation Impact Values
470N/mm² 530N/mm² 28% 60J@-20°C - 50J@-30°C
ESC6010 Cellulosic Electrodes
Part-No Description Pkt Weight
ESC-60-2.5MM-5KG MAGMAWELD 2.5mm 5KG
ESC-60-3.2MM-5KG MAGMAWELD 3.2mm 5KG
ESC-60-4.0MM-5KG MAGMAWELD 4.0mm 5KG
ESC-60-5.0MM-5KG MAGMAWELD 5.0mm 5KG
Typical Weldmetal Analysis
C: 0.10% Si: 0.20% Mn: 0.50%
DC ±
AC
274