Views
10 months ago

UNIMIG Cat 2017 low res

Power 4 Geared Factor

Power 4 Geared Factor Roller Correction Drive Synergic Over Smart Temperate Set control 4 Geared Roller Drive Synergic Smart Set VRD Voltage Reduction Device ON P-TRONIC 100 Switchable VRD 240 Volts Single Phase Australian Standards Plasma Standard MIG/MAG MMA DC Stick - 100 Spool Gun / Push Amp Pull Plasma Standard MIG/MAG Cutter Cuts: Steels, Stainless, Cast Iron, Brass, Copper. Aluminium FEATURES Spool Gun Lift Arc TIG Touch Button PFC Power Factor Correction Digital Plasma Display Cut VRD CNC Voltage Reduction Device OFF ON Switchable VRD GWR Australian Standards Geared CNC Connection Wire Drive OFF DC TIG Pulse Standard MIG MIG 35mm Cut on Mild Steel 4 Geared Roller Drive Over Temperate control Duty Cycle 40% @ 80Amps HF Plasma Soft Touch CutDial OFF ON I5amp I5amp IOamp Switchable VRD 240 Volts Single Phase Computer PLC 240 Volts Single Phase Numerical 240 Volts Single Phase Control P MMA DC Stick GWR Standard MIG/MAG Synergic Power Pulse Line Program Controller Geared Wire Drive Connection I5amp HF TIG Spool Gun 4GR Plasma Cut IOamp 240 Volts Single Phase Spool Gun / Push Pull AC/DC TIG Pulse MIG Synergic Smart Set HF Plasma Cut P 240 Volts Single Phase Spool Gun / Push Pull Synergic Pulse Program IOamp Torch Alarm Output Current Control Cut Mode Selector Lift Arc TIG DC TIG Touch Button PFC Power Factor Correction Over Temperate control 2T / 4T Trigger Control DC TIG HF TIG Air Pressure HF TIG Check AC/DC TIG Standard MIG Push Pull Ready Spool Gun 4GR 4 Geared Over Temperate Roller Drivecontrol 4GR 4 Geared Roller Drive Over Temperature warning Synergic Smart Set AC/DC TIG Push Pulse Pull Ready MIG Synergic Smart Set Digital Display Soft Touch Dial Plasma Cut HF Plasma Cut CNC Australian Standards MMA DC Stick CNC Connection Manufactured in compliance to AS/NZ60974.1 PLC MMA DC Stick Standard Power MIG/MAG Line Controller GWR Standard MIG/MAG Spool Gun Geared / Push Wire Pull Drive P Spool Gun / Push Pull Synergic Pulse Program Thermal Overload Indicator Air Pressure Gauge • Continuous adjustment of cutting current • Start arc with special pneumatic cycle systemto Touch avoid Button disturbing other Standard MIG equipment Spool Gun Standard MIG Spool Gun Pulse MIG • Post-gas function for effective cooling of the cutting torch • Automatic shutdown of the Gas for a quick ­ Post re-restart the arc Push Pulse Pull Ready MIG Digital Display Soft Touch Dial Soft Touch Dial Plasma Cut Plasma Cut HF Plasma Cut HF Plasma Cut CNC PLC CNC Connection Power Line Controller PLC Power Line Controller GWR Geared Wire Drive P Geared Wire Drive Synergic Pulse Program GWR Push Pull Ready P Synergic Pulse Program Push Pull Ready Technical Data Model P-TRONIC 100 Code V0059AA Power Supply 415 - 3 +/- 15% Primary Current I1 MAX 21.5A Primary Current I1 EFF. 15A 2Years Protection Class IP21S Dimension (mm) 345X610X600 Weight Kg 44 Kg MIN.-MAX. Secondary Current 20A/88V-100A/120V Output Current I2 60% 100A 100% 75A Output Voltage V2 60% 120V 100% 110V Max No Load Voltage U0 310V WARRANTY WARRANTY • Safety contacts on the head of the torch,­ to ensure removal of parts safely • Special Cycle for cutting sheet metal grills • Special Cycle for gouging • Control pilot arc less than 10 A, ­ to facilitate the cutting of the overlapped sheets­ Overview­ The P-Tronic 100 is a professional, portable three phase 415Vac inverter plasma cutter, equipped with a special system of power pneumatic start of the arc. The P-tronic 100 is supplied with a 6m plasma cutting torch PT100, with plug for quick connection to the source. Three different types of cutting cycles can be selected, standard cutting cycle, gouging (includes the use of parts specific to this case) and special cycle for the cutting of sheet metal grills. Excellent cut quality on mild steel sheets, galvanized steel, stainless steel, aluminum and copper. Connect directly to any compressed air source, 1 Product Code: TRPC100P Standard option includes: P-TRONIC 100 Machine, PT100 Torch 6m, Earth Lead 4m, 2Years 90 1Year Year WARRANTY 2Years WARRANTY WARRANTY (Power Source)

P-TRONIC 100 Plasma - 100 Amp Plasma Cutter Torch Spare Parts - Machine Options & Accessories PT-100 AIR COOLED PLASMA TORCH Rating: 30-100AMP, Air/N2, EN60974-7 100A @ 60% duty cycle, Air FLow: 200 plm, • (BS) = Standard Layout = Back Striking No WGA Part No. Description 1 • 09700/TER Hand Torch Head 1a 51190.41 O-Ring 1b 09700.48 Cooling Tube 2 09705 Handle with Switch 3 • 52556/TER Electrode (BS) ­ 4 60025 Swirl ring 30-70A 5 • 60026 Swirl ring 80-100A Gouging 6 51245.09 Tip Contact Cutting ø 0.9, 30-40A (BS) 7 51246.10 Tip Contact ø 1.0, 40-50A (BS) ­ ­ 51246.11 Tip Contact ø 1.1, 50-60A (BS) ­ ­ 51246.12 Tip Contact ø 1.2, 60-70A (BS) 8 51246.14 Tip Contact ø 1.4, 80-90A (BS) ­ ­ • 51246.15 Tip Contact ø 1.5, 100A (BS) 9 60500 Retaining Cap, 30-70A 10 60501 Retaining Cap, 80-100A 11 • 60444 Double Pointed Spacer (7&8 Only) 12 51276.10 Contact Tip, ø 1.0, 40-50A (BS)­ ­ ­ 51276.11 Contact Tip, ø 1.1, 50-60A (BS) ­ ­ 51276.12 Contact Tip, ø 1.2, 60-70A (BS) 13 51278.14 Contact Tip, ø 1.4, 80-90A (BS)­ ­ ­ 51278.15 Contact Tip, ø 1.5, 100A (BS) 14 51278G.22 Tip Gouging, 100A (BS) 15 60502 Shield Cup Body 16 60504 Sheild Cap, Hand, 40-70A 17 60505 Sheild Cap, Hand, 80-100A 18 60508 Sheild Cap, Gouging Torch Model Description Part Number Tecmo PT-100 Plasma Torch PT-100­ ­ Welding Goggles UMAWG­ Automatic Welding Goggles Option Page reference: 137 Machine Options Air Filter 50500-12­ Sub-Micronic Air Filter Option­ Page reference: 93 Air Filter Cartridge 50505-48­ Sub-Micronic Cartridge Option­ Page reference: 93 91

PowerMaster SP Series Sales Brochure - Victor Technologies ...
What is Synergic Pulse MIG welding? - Victor Technologies - Europe
Plasma equipment solutions from EsAB - ESAB Welding & Cutting ...
Low Cost Torch Height Control Install and Setup Manual - CandCNC
Training Articles Journal - Centricut
Operating instructions - EWM Hightec Welding GmbH
Aristo® Mig 4004i Pulse Aristo® Feed 3004, U6/U8 Aristo ...
PT-31XL and PT-31XLPC Plasma Arc Cutting Torches
4. TIG Welding and Plasma Arc Welding
warning - ESAB Canada
Operating instructions - EWM Hightec Welding GmbH
Origo™ Mag C171/C201/C251
Product Catalogue - EWM Hightec Welding GmbH
Mechanized Plasmarc Cutting Torch - ESAB Welding & Cutting ...
4 - Oerlikon, the expert for industrial welding
PT-37 - ESAB Welding & Cutting Products
PLASMA ARC CUTTING PACKAGES - ESAB
Origo™ Mag C171/C201/C251