DIN EN 16001: Energy Management Systems in Practice - adelphi

You can use various sources for recording, such as
energy bills, meter readings, energy reports from
building management or information from administration.
If you have little or no data for a separate illustration,
you can make assumptions with the help of type /
name tags, measuring devices, through operational
hours, tank level etc. However, extreme caution
should be exercised here as error estimation must
be traceable.
The electricity supplier can normally provide a
15-minute load profile on demand. This can help
you maintain the time series.
Above all, for big consumers you should consider
installing more measurement devices.
If there are no, or only a small number of specialists in
your company who can take on these tasks, consult
external consultants or provide your personnel with
advanced training.
An overview of energy management software available on the market
can be found at:
http://www.energieagentur.nrw.de/_database/_data/datainfopool/Marktspiegel_2005.pdf
http://www.perpendo.de/files/tga-1-2005.pdf
The illustration depicted below is only a representative
structure for recording data with the help of software.
If you already have a computerised infrastructure for
Bus
R DAtA ACQuISItION WItH HElP Of SOftWARE
Own illustration based on http://www.perpendo.de/files/tga-1-2005.pdf
regulating and monitoring the plant technology, then
it is worthwhile searching for relevant IT-supported
solutions.
Management / Strategic Planning Energy Management Techn. Planning / Maintenance Accountancy / Administration
Production
Control
Area Equipments / Data Logger
Central
Control Centre
Manual Data Collection Automatic Messages
Meter
Central
Database
Benchmarking
Intranet
Bus
31